Search results

I have a Lamey motor I hydro locked. Sending the crank down to get rebuilt. Really should put new pistons in once I get the crank done.... I bought the motor used and it had flat-top pistons in it... Wondering which model/kawi flat top pistons to source out or would work out? Or should I say...

Hydrolocked my motor this weekend - 100% human error on my part. :hitwithrock: Bent a rod on my 8MM stroker crank which I was told is a Rad but has Hot Rods written on the rods... Anyway, looks like just a rod needs replacing, along with wrist pin bearings of course... who is reputable and...

The setup is as as follows (freestyle ONLY): -Lamey Powervalve Cylinders, 62T Cases, 8MM Stroker, 81.5MM Flattops, ADA Head, ~800CC & 185 PSI Compression -BlackJack 44MM Carbs -Factory B-Pipe, Mod Chamber -MSD Enhancer I bought this motor as is from a fellow board member here. There...

Thursday I will be picking up a 62T Lamey PV motor, but don't know where to start jetting my carbs at. The setup will be as follows (freestyle ONLY): Lamey Powervalve Cylinders, 62T Cases, 8MM Stroker, 81.5MM Flattops, ADA Head, ~800CC & 185 PSI Compression BlackJack 44MM Carbs...

The drivetrain I am currently running was a direct swap into my hull and came with Dual 44MM BlackJacks. Why would someone want to run these oppose to OEM 44MM Mikuni Super BN carbs? Doesn't the BlackJack 'begin' life as a Mikuni? I am just looking for technical differences but don't...

I am curious as to how people are modifying there cases to use a say 10MM stroker crank. I know to use Devcon Liquid ooz to first add mass to the case before porting but my question is the crank area, and the galleys the webs run through. Are people just grinding/machining material away, or...

my buddy across the street is convinced he needs to start running race gas... i beg to differ. he has an SXR that is pretty built up... great all around power, he freestyles but likes to do some WOT occasionally: -84.5MM flat top pistons -stock shaved head, each cylinder about 160psi-ish...

Update: 7/29/2008 Check page two for update and pics. First Post little mishap this evening... hood was already starting to crack a bit, but i expected it to hold up the rest of the season... wrong. bustin' some nice rolls', then the worst happens. hood falls off, ski' sinks...

Kinda funny. Bought this jetski over the weekend off of Kenny J and he was kind enough to drop it off at the track to me. We were @ Beaver Run in PA. Through the ski' in the line up to turn some heads and it matched my buddies bike. :smlove2: -Roo

Simple question - what is the best/preferred Freestyle Intake Grate for the Kawi SXR? Thanks! -Roo

whoops

UPDATED: 6/16/2008 Here we are, June 16th, and what a surprise, I have nothing to show. Waterdawg Kustomz: just give me my money that is rightfully mine back so this does not have to be dragged out and ripped away from you. I placed my order over 6 months ago, you have $6000 of mine...

Just talked to Ed @ Full Spectrum. Awesome guy. Thanks all.

Tried posting in Tech, but access denied. Couple minutes to burn... thought I'd post something someone might find beneficial. What is the purpose of this mod? Shave a couple pounds, but in my case with the exhaust that I will be running on this years setup, it is the only thing that will...

Greetings :Banane37: Simple question. Where can I find Flame Arrestors / Air Filters with an Inner Diameter of 49mm to fit over a Full Spectrum 49mm carb? Will an adaptor be required? Thanks for the input. Regards, Andrew

Who has a nice selection of Jet Pilot Wetsuits and Vest's? Most sites I check out don't like ANYTHING that is on Jet Pilot's website (limited selection). Thanks, Rooski

Did some searching last night, but answers were scattered... Interested in this power plant after much research... The motor out of the gp800 is referred to as 66E. 66E stands for the cases, what is the code for the cylinder? Also this comes standard in what bore and stroke? Also...

Where might someone get replacement sleeves for a Lamey motor? I am guessing Lamey direct... but curious on cost and how to contact, or if others provide them. Regards, Andrew

I have never posted pics of myself nor have I ever had pics of myself in action. After I saw these I was like sweet, I am doing something right (or at least getting there)!!! We were out @ St. Clair this past Sunday and a guy on shore snapped these pics... I talked to him after riding and got...

i am a returning customer, not a first timer. ordered 3 sheets of 42x60" 3 weeks ago... she said ship date was August 2nd, but would probably ship sooner since it was in stock. i was like kick ass, riding season is half over and i have been down for to long this summer since the motor blow up...