Search results

Saw: Spiderman 2 - I thought it was really good. It has a lot of twists and turns and there are a lot of bad guys, but overall thought it was well done. Xmen, Days of Futures Past. Thought it was AWESOME! Really neat how they tied all of the movies together. Out of the Furnace - I...

Do yourself a MAJOR favor, DO NOT use the stock steering cable. It will eventually bend and changing it with the 1100 in the hull is a pain in the a$$. SM

:)

The only negative to the 1200 B2 is that it can be a little of a rough ride, meaning that the hull is so flat, when you ride in chop, it is kind of jarring. Other than that, it is WAY better than the 760 version in terms of carving, speed and hook up. SM

If you are talking about mods while keeping it a twin cylinder motor, there are plenty - pipe, carbs, reeds, heads, porting, timing, etc. etc. As for hull mods, we tried some stuff like removing the rear stabilizers, cutting the rear corners, making out own sponsons, nothing really made too...

Considering it only has a 760, the B2 does have good bottom end grunt, but they are SLOW. That is an extremely wet surface hull and is darn near impossible to get over 50-52mph without some pretty major mods. Now, if you really want to have fun on a b2, they are an extremely easy triple...

The 964 set up right shouldn't even be compared to anything south of an 1100 from the other manufacturers. These motors make incredible power for their cc size. SM

Carbon frames are fine for anything other than downhill. There are plenty of videos out there showing how carbon is stronger than aluminum in just about every aspect. Yes, they are more prone to breaking if you hit a rock at an off angle, but they are much less likely to crack at the junctions...

That is the nature of the rotary valve motor. Lags down low compared to a reed motor, but pulls good mid to top. Add onto that, the hx is a heavy girl with a deep V. The B1 is relatively light with a flatish bottom. For two skis that are in the same racing division, you couldn't get more...

^^^^hahahahahahahah, thyroid problem. Fun factor, b1 all the way. If you can ride and know how to set one up, the b1 can be competitive on the track, but the HX is infinitely easier and more comfy. IMO, the only way a b2 is fun is with a triple in it. SM

Try a smaller prop. For your application, a 10/17 ish hooker would probably be pretty close. Get the rpms up to 7200 or so and you won't believe how much harder the 'hit' will be. SM

I can't even imagine falling off of that thing going that fast. I got hit going down the back stretch at a tour race once on a triple piped GPR. I 'might' have been going 70 when it happened. I was bruised and sore for a week. Water hurts at 70ish, it probably feels like dirt at 110 plus. SM

jensonusa.com pricepoint.com

Stock 1100 waveraider box has a different intake tube size than the outlet of the kawi 1100 pipe. You could either buy a reducer to make the change in diameter work, or cut off the inlet tube of the waterbox and weld on the proper size. IMO, unless you have access to a welder, just buy the rad...

The Pro 1200 would fit with the stock pipe, you would just have to come up with a mounting solution. Also, the polaris triple is a long motor, so you might have to move or replace the tank with a smaller one. The design of the polaris motor is nice, the only shortcoming for them is getting...

Handles very similar to a stock hull, goes thru chop marginally better. Chines aren't much deeper, but the entire intake is moved rearward about 3.5 inches. This helps with hook up. Scottie

Just ignor dip$hit. All he wants is the attention. No one on here gives two $ hits what his opinion is or anything he has to say, positive or negative. He's just your typical know it all dillweed kid who thinks he knows everything. Getting caught up in his bull$hit only accomplishes what he...

^^^lol, sad, but true. SM

Paul Pachowski (sp) had a 2008 SJ with a nicely built 951 motor - carbs, ignition, pipe, etc. I rode it a few years ago, it was FAST and handled really good. But, the best sj I've ever ridden was Brad Davis' 1100 kawi SJ in an 08 hull. That was about as perfect a play stand up as one could...

OK, so over the last few weeks, I have seen: Captain America - awesome. I thought it was the best Marvel Movie other than maybe the original IM or Avengers. More like a spy movie than a Marvel movie, really. Noah - hated it. Special effects weren't that good, tried to turn noah into some...