Search results

Anyone have a full length circus plate laying around? I don’t have time to lay one up before the next trip !! Thanks

Hey guys, I’m moving onto a bigger engine so I’ll be letting go of this little fella It’s got about 15 gallons of fuel thru it on the crank and bottom end. It’s on its second bore on fresh sleeves due to a machining error. -760 jugs (real ones know what’s up) -wossener pistons -cylinder base...

Reduc, ring, steering nozzle. You’ll need a cable and a bracket or you can make a bracket out of plate if your feeling zesty Switched to a different style, completely functional just ugly. 300 (F&f or cover fees)plus the ride for the whole setup. Would cost you 550 ish to piece just these...

Skat prop marked 9/15 came out of a blaster 1 she’s ugly but much like a big girl on a cold night it’ll get the job done Comes with free spider nests 200 plus the ride

Cleaning the shop out of all the odds and ends - Set of clean matching numbers gp800 engine cases that have been machined to accept the adapter plates to run in a stand up, comes with half studs Asking 200 plus the ride. - two sleeved cyls at 87 bore, nothing that catches nail but not pretty...

Looking for a 155 trim system, anything but rrp really. Can’t get enough throw out of my current setup looking to move on. Whats out there?

Looking for a few blaster parts for a build ; Gp760 midshaft; shaft only or housing included don’t matta 15/20-15/21 144 prop not picky on brand or cutback Pink and black turf if anyone has any sheets left over Thanks

Barely any scuff on the cylinder wall Locked up between shifts from 1st to 2nd Rod had enough after 32 years haha Ain’t a ski please forgive me kahuna I thought it was interesting

Two MSD total loss wheels for Yamaha cranks Smaller one is for front facing pickups (flywheel cover) Other is for crank side pickups Both have mild teeth wear on bendix side from rub over the years and show signs of wear inside snouts, useable but would recommend a good lapping before use...

Selling my thrust pop top and with it will be a jazz 3 gal fuel cell. The thrust fuel fill shows signs of use but is functional just ugly. Tank also works just fine, was cut out a little ugly but works. Will need to source your own gasket either make one from the right material or get one...

Looking for a kart tank in 2 to 2.5 gallons preferably setup for dual pickups but single is fine. Generic pic here

Looking for some sort of waterproof enclosure setup for a MSD TL system. Let me know what you have.

What for big bore cyls are floating around out there anymore to run on a stock stroke 701 bottom end anymore? I know thrust has a 850 kit but that’s about all I can remember. Anyone have any personal experience with any of them? Probably looking to stay on a stock stroke crank on this...

For years now I’ve been lugging around my spare parts and tools in stupid plastic containers. Was thinking about changing over to a pack out system. Curious to see if any of you do anything similar or have any other ideas. The totes kinda suck cause there’s no way to organize them. I don’t have...

I was wondering if any of you have come across a battery bank battery charger that I would be able to take to the lake when I run my total loss so I can charge my lithium battery halfway thru the day without having to fire up a generator. I have a second battery I take along but pulling the...

off the market!

Hate this thing. The bane of my existence. 100 plus shipping. Get it away from me as fast as possible. Functions as advertised by rrp.

A set of TI 50mm ez flow’s. Bought these in a package deal and I will no longer be needing them. carbs/linkage, no speed plate or mani. Will need rebuilt. Asking 800 PayPal FF plus the ride/fees if you don’t want to pay FF. They run about 1500 new, save some cash and put those 44’s on your...

Dasa billet intake and speed plate bored to 50mm. Comes with speed plate to carb bolts and nuts. Intake was vapor honed and has some pitting but only cosmetic blemishes. Came off a *once* running 1200. Has o rings with less than an hour on them. Asking 250 plus the ride. Will include vf2 cages...

Looking for a 155mm skat 6/10-7/11 e75 swirl, cutback 3-5mm preferably. Let me know what you have. Thanks!