Search results

the shoes i bought are suppose to run true to size. i tried some 10's (what i normally wear) on with my cotton socks and they were a little snug but not tight. i am hoping that 10.5's will be ok with neoprene socks. are you guys telling me that 10.5 will be too small?

what kind do you have?

I just ordered a set of asics wrestling shoes that I am going to mold my foot holds too. I ordered them .5 size larger due to the neoprene socks that will be going in them. All of the neoprene socks i look at online appear to be pretty tall though and I want something that will go about the...

site is up again....just click download for free with basic.

61x cases, 61x cyl 62t cases, 61x cyl or 62t cases, 62t cyl. i guess it is possible to have 61x cases, 62tcyl. preferred is something with the 61x cyl.

well.....i went to lowes yesterday and did some brainstorming. in the toilet section they have some plastic bushings that have a flange on one side. these are prethreaded on the inside and are even recessed so that when i screw a small bolt into them they will sit flush. I plan on using an...

I am looking for a couple of drain plugs like what come on sitdowns....something a bit smaller though so it would fit underneath my exhaust manifold on my sj. here is a pic of what i am talking about. has anyone ever seen these or something similiar in a smaller version.....most of these...

well....i have been searching for small drain plugs but am having a hard time finding any that look good like the ones that come on sitdowns. I did find some stuff that would work at the hardware store. if i do a little defoaming at the very bottom of my strakes will i have any structural...

i like the idea of being able to leave them open so the foam can air out when you arent riding.

if i ever refoam that is what i am gonna do......i guess they could be installed even without foaming if you think about it. drill the holes.......punch the foam out at the very bottom of the strakes......then tap and install the caps.

here is a download link to some pics.....about 60mb....about 60 pics. http://www.filefactory.com/file/e0ceb5/ if i needed too i could compress them more but didnt know if i should or not....they are about 30% size that they were.

here is a link to a downloadable zip file. it around 60mb. http://www.filefactory.com/file/e0ceb5/

after talking to ratti i figured i would try and build up the turf and then mold it to my feet by sanding it in areas. this will help lock me in. i figured i would try this first since it would require the least amount of work. ratti uses rickters and seems to stay in them so i think that if...

my brother bought some b stock and it looks just as good as the expensive stuff i bought from blowsion. i will be going b stock next time.

i see......thanks for the info matt.

so do i sand it to where it is smooth down to the groove (even flat surface) or do i just roughen it up. thanks

so what you are saying is that even though the exhaust port roof sits higher in the cyl you still notice a substantial increase in off idle hit due to the increase in displacement. how does it compare to a big bore 61x.

i am thinking about leaving my tennis shoes behind and going to a wrestling shoe. currently there is too much room in my footholds for the wrestling shoes and i fall out easily when trying to do something. so i think i am gonna add some more turf to the tops of my holds and sand them to...

so does a 62t need to be bored to accept the larger sleeves? you said it didnt then you said it did. (edit) I see where matt posted above saying that it does require boring. i had to have my cases bored for my bb sleeves but i think the bb sleeves might be larger than the 760 sleeves. i have...

you will also need to bore your case top half to accept the larger sleeves. this is more work than it is worth if you are wanting to use this for rec/freestyle. from what everyone says your 701 will hit almost as hard as that 760.