Search results

Finally had some time to something other than work. I got sick of my stock bars bending so I fabed up a stearing plate that takes oversize mountain bike bars. (just looked on the RRP site today to see something the same!) made some alloy fitings and go them anodized blue (Bling Bling), sorted...

My Paint, Good luck Man, takes lots of effort but so rewarding!

Hey Chris, Motor mounts from WDK bolt in to your existing ones and fit to the 66E. No hull mods required. Pipe is a hassel though, if you run a WDK pipe you have to run a cart tank ( which is way to small for anything other than frestyle.) I have been working on a manifold for a B pipe as has...

It Was briliant! The surf is smaller than normal for this time of year, But was very glassy. This was a good thing as I haven't ridden for a while. A bout mid Auguest we get consistant 8-10" clean glassy waves for a couple of weeks! It is like riding on a big skate board quarter pipe. I...

Photos from my surf ride last weekend, Its the middle of winter here in New Zealand burr WATER TEMP 19 DEG (66 FAHRENHEIT)

Some photos of last weekends surf ride, Middle of winter here in New Zealand Burr!

No flat water for this ski. After my ride on the weekend I came to realise "What would I do with all that power???? answer more swimming as I wouldn't be able to hang on to the thing." So I think I will go with some mild free ride port work and an enhancer and may be some carbs? Cheers Tim

Cheers Guys Yes that is welded on to a stocker. I extended it when I started racing then cut the D out when I started doing more surf riding. Works really well in the surf. I machined up the internal filler myself and had it anodised with all the other blue parts. I made a bracket to hold...

Hey Guys, I have finally found the time to post some pics of my ski. I have always liked JKs Shark skis so last year I put this together based on JKs 07 pink and yellow boat. Big thanks to Willie for the paint and JD at Blowsion for all there help. JK hope all is well. What its got...

Hey #0, Thanks for your pm it helped alot, have you got your 5mm stroker motor running yet? I would be keen to hear how it goes As I am going to start a similar motor project. What one of the 4 port timings you listed did you end up using? Cheers Tim

I am just puting my motor 62T back together after the stator plate got smashed up. I have cleaned out the bendix as it had alloy grindings in it form the smashed stator. What do I use to lube the thing as it is dry now form the cleaning process. Cheers Tim

I am just putting my motor back together and need a measurement. My 62T cases got damaged when the stator bolts came loose and I have had to remachine the locating lugs where the stator fits as they snaped off the cases! I have the stator mounted to a spacer plate and am now trying to set the...

hey wave demon how you getting on with your conversion? any more pics?

Does anyone have any photos? Has anyone done one with a b-pipe? any help would be appricated Cheers Tim

Does someone have a link to this Jap SJ with the 66e motor