Search results

First the problem. 95 750 sxi dual carb factory pipe milled head old aftermarket prob ect.. Ski will start great. Ski will put around great. Ski will go wide open great. But there is a dead spot in the throttle at about 1/3 ish. you will be playing around and turn or going straight and pull the...

http://www.ebay.com/itm/3k-Weave-Full-Carbon-Fiber-Mountain-Bike-Riser-Handlebar-Hot-Eagle-Eyes-Design-/180790293770?pt=Cycling_Parts_Accessories&hash=item2a17f0f50a#ht_1442wt_980

Last year running a ported 701 with R&D dry pipe was fun. But alas I want more. So Blowsion and all their dang catalogs they send you just sit around and temp. So I have since ordered up their 850 sleeves and pistons. The 98 sj hull i have was painted rather well and was originally built for...

Temp was about low 30's and sunny with no wind. water was glass. So we loaded up headed for the ramp and we were surprised to see 4'' of ice! So we rode anyways. Two wetsuits, booties, neo gloves, jet pilot neo hooded jacket and helmet, I was set.I didnt fall in so I was sweating when I was...

So there is a pretty clean fx1 sitting in a parking lot on a trailer. I want it. I left a note in a bag rubber banded to the tongue a few weeks ago saying Im interested in buying it. but neither the note nor the trailer has moved. Is it possible to find the owner by the HIN number and I could...

Blam! now you can http://cgi.ebay.com/ebaymotors/MOTORCYCLE-QUAD-RHINO-Turbo-BIKE-SEADOO-Small-IHI-RHB31-/110695313833?_trksid=p4340.m8&_trkparms=algo%3DMW&its=C&itu=UCC&otn=15&ps=63&clkid=3086047474359064615 The bolt holes in the compressor cover seriously looks like a carb would bolt up to...

Every time I prehop and pin it the thing will cavitate like its on ice and lose my momentum, totally screwing up the sweet jump i was about to do. My other 98 sj has way more mods and the same prop with an r&d intake, the one that came with the pump stuffer but I took out the pump stuffer. It...

I want to take out the long aluminum tube to gut out some wet foam. Do you have to hammer the tube from inside the engine bay? Is the flange on the back welded to the pipe? Or does the foam just make it to solid and you have to cut the tray out, take the foam out and defoam it that way. I just...

First time turfing foot holds and putting them in, but I did turf a 550 last year with b stock so i had a little practice. I used the inch stuff on the bottom and 1/4 in foam on top of the arm rests and inside the tops of the foot holds and where you put your feet on the bottom. Im going to try...

I have an R&D water injection kit that came with my ski. after taking the motor out for a new top end I noticed the WI was not even hooked up to the dry pipe. Also the solenoid was corroded and full of sand. I have a few NX nitrous kits around so I'm guessing I can just use one of those fuel...

First off where do you get new O rings for this head since it doesn't have a gasket. I currently have a 98 sj with pretty much R&D everything. I bought it that way for $2500. Not a bad deal. Only problem is it has a flame paint job... lol. But from what I gather it has a stock motor that I am...