Search results

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=250633961701&ssPageName=ADME:X:eRTM:MOTORS:1123 Just curious, any idea what these are? Apparently all they say is "Skat 7" on them, they don't appear to be super slim-lines since they'd have the pitch marked. And that's weird there...

Anyway to do that other than sending it to JSS? I can't find any guides on how to re-wind stators, but it seems fairly simple with the right tools/materials.

I'll try giving that a shot, bypassing the start-stop switch or cleaning/lubing it.

If it's flooding with gas then why does the spark almost disappear? The plugs don't look that "wet", and I've even tried swapping plugs while it's not starting with the same "weak" spark produced.

Went out and rode for about 1 1/2 hours, came back in and the same thing happened; starts/stops/runs fine within 10 minutes of riding. After ~10min, the spark starts to weaken, I noticed that the engine was quite warm when the spark went to crap. When I was out riding I was taking lots of...

Yeah I don't think you could, on a squarenose at least. You'd have to cut up the stock plastic/foam chinpad piece then recover it with vinyl in a custom pattern. I'll order up a handlebar and get that machined on Tuesday, I'll post up if it worked or not. Ski is out of commission due to bad...

Weird, just went back down, the ski had been sitting with the lanyard in it (bad?) for about 2hrs. Tried firing it and the same thing happened, removed lanyard, waited a bit, then put it back in, and it fires right up. I took some video of it starting/stopping, and of the "healthy" spark in...

Would I be able to notice anything while trying to start it? Where should I look for leaks, at the hose connections or on the hoses too? Do the stock waterboxes ever leak? I noticed I get a fair amount of water in the hull after riding for awhile, even when I'm not hitting a lot of waves. I...

I picked up this superjet assuming the issue was carb related, rebuilt the carb and cleaned/inspected everything, checked out OK. Got it running just fine, but now it's having the same issue that it had before: It starts right away, runs great, plugs look clean right when I start riding. I go...

I don't think so, the "clamping thickness" is 25.4mm/1", but the rest of the bar is 7/8" just like the stock superjet bars. Check this out, it's a 25.4mm clamp bar, as you can see the thickness reduces after the clamp area. Also, those ODI grips everyone runs are the exact same thing as the...

Anyone ever modify the stock plates for straight bars, then bore the mounting plate out a bit to 1" (25.4mm) to fit Mountain Bike handlebars which are 25.4mm mounting diameter? You can get flat bars for like $15, tempered and anodized, sometimes 7075 aluminum. Seems like a better option than...

I think that warning sticker adds at least $500 :laugh2: Seriously though that's one badass ski.

Also check your hood, along the bottom edges where it contacts the hood seal. I've been getting lots of water, I assumed the stock seal was just bad, but on the front the bottom of my hood is warped and has a crack/hole. So it's not sealing, and there is a small 1/4" hole that lets water in...