Search results

Hi Chris I need 1 more LW Yamaha F4T316 62T = 2.76-lbs. 701 Ring Gear & Front Drilled painted orange,Please send me your paypal plus total cost with shipping to Greece with usps. Thanks Pavlos

Thank you, but I would really want more info about good and bad side of each setup

Surf.

Hi I need some help here to deside witch way to go ?? I want a Dasa 950cc but there are 2 setups available for a 950cc motor 1) 89mm with +8mm crank 2)94mm with stock crank Question is what are advantages and disadvantages of thease 2 setups Thanks Pavlos.

Hey JETAKIS nice work , whats under that hood ???? with love from Chania Pavlos and Chris:puppy_dog_eyes:

Tuning info from Jetmaniac ,the ski now rips. Brand = MIKUNI Model = A/M SBN new Size =44 Quantity = 2 Main Jet = 110 Pilot Jet = 125 Needle/Seat = 2.3 Spring = 95gr, 19 psi popoff Pilot screw = 3/4 Main Screw = 1 - - - - - - Gas Octane = 98 Altitude = SEA LEVEL Main type of riding = FREE RIDE...

Right here bud http://www.x-h2o.com/threads/...32#post1094232

Usually its the back piston that gets baked the reson why ???? (I have never found out 18 years now) the sand in your cylinders is ok its normal for all skis that ride in the surf,the crack in the water box is also ok it happens often to all b1s (why the b1 61x and not the sj 61x an other query)...

I agree its going to tear up your chamber ( too expensive to lose a part like that thats not even available any more) my tip is loosen the nut at the front part of the chamber(next to the tank) just a little say 1/4 of a turn using a safe nut (the ones with the plastic inside) that way it will...

Are you using your stock pipe ?? if yes do you get one of your 2 plugs wet with a milkish foam when this happens ?? If thats yes for both questions your oem exhaust chamber has a internal leak and water is returning to one of the cylindrs when you stop the engine,thats what happend to b1 and I...

Nice work done there !!! I also thought about that but then the cage goes to far in the case ,dosent that inerrupting the upward flow???

Well thats true, finally got it all sorted out you can use vforce3 reed cages with stock intake and some other a/m intakes that have a flat mounting surface for my boyessen intake I need rad valves or older vforce2 reeds that have the same shape as stock reed cages so they can mount in the gap...

Hi I need some help here I just recived my boyessen intake that im using with 2 new 44mm carbs and along with that I grabed the Moto tassinari Vforce 3 reed system My issue is that the intake has the gap on the inside for the stock reed cages so far so good,but with the vforce3 that bolt on the...