Search results

I am going to powdercoat my cylinder soon, and a I am wondering if cooking it at 400* will cause any issues with the sleeves shifting etc.

I did a search and found the part number for the two top lord mounts I need, but I could not find where to buy them from. anyone have any ideas? j-11729-190 is the part number

I am looking to add a set of sponsons to my 97 sj after riding another ski with them last summer. There are so many different ones on the market right now I thought it would be a good idea to compare them so I can get a better idea of what to get. manufacturer 1. attachment (screws vs 5200) 2...

does anyone have a turf kit with the rail caps they could trace onto posterboard and mail to me? I am struggling to get it right, I have tryed three times now and cannot get close.

I have a 62t/61x 701 in my 1990 sj, with full 62t electronics. My timing is set right in the middle, which I assume is zero. I rebuilt the carbs with winderosa kits, and new wsm 1.5 needles and seats. My jetting is stock and I have gold popoff springs. I have the fuel line ran from the reserve...

I am looking for a set of bushings for my square nose mmf pole. The only ones I have seen are for ac poles. Where would I find these?

I have a bone stock 650 in my 1990 sj, when it gets warm, you can accelerate at full throttle for about 3 seconds, then it bogs and dies unless you let off the throttle, if you do not it starts right away. I thought maybe it was the temp sensor, so I unbolted it and ziptied it to a cooling line...

After I installed my Midshaft today I noticed that it has some movement in what feels to be the bearing. Is this normal or is something wrong?

my 1990 superjet midshaft and pump do not appear to have a grease fitting like on my kawasakis, do I have to fill them like a sea-doo?

I was wondering what the average price for a freshwater tdr waterbox for a round nose is, and what a stock box goes for.

I need to fix some cracks in my tray, and maybe add a set of footholds. I have never had a ski with holds before, and I have only done minor fiberglass repair before. I saw one thread where the guy removed the exhaust tube, and defoamed that side through that hole, and the other side through the...

I am considering painting my ski since I have it completely apart. I am looking for some ideas.

I recently bought a new motor for my superjet, and I also have a riva girdled head. If I install the studs 1 by 1 would there be a need to replace the base gasket?

I have a 1990 superjet that the kill switch does not work on. I cleaned the contacts, still nothing, you have to pull a plug wire to shut it off.

I was looking at my 1990 superjet today, and it seems that I could put a T in the line from the head to the bottom of the exhaust and run a pisser out the side to dry out the pipe, has anyone ever tryed this? Another reason would be so I could see if cooling water is flowing.

I recently bought a 1997 superjet with a blown motor. Along with the ski, I got a riva dry pipe, and riva girdled head. I found a motor for the ski, but I am wondering if the pipe and head will cut into reliability/longevity of the motor? The head has 35cc domes. I was also wondering what pitch...