Search results

I had a friend cancel today and now have an extra double bed and a 'cot'/couch at the host hotel. Nights from 1/10 through 1/14. The room cost me $150/night so your cost would be $75/night. If there are two of you, then cost would be split 3x ways. Hit me up on PM. Also I have a spare spot...

My plan, and because its been too dang cold to test and tune in my home-town - is to stop here for about an hour or so - mainly on waiting for check-in at the beach hotel, but also because this area lends well for ski tuning in an easy launch area unlike the Daytona beach waves. Better to fix...

I'm trying to get my head-dome size correctly spec'd for C12 race fuel and need to know the best most accurate way of determining over-all CR for the fuel. I need to know if most calculate from the bottom of the stroke (IE full stroke aka 68mm for stock stroke), or from the top of the exhaust...

Hey folks, Im running a ported Dasa 850ss engine with modified squish at 40-thou, CR is at about 7:1 from top of port, or 12:1 full sweep and yield is 225psi compression, running 100% C12 race fuel. Right now I just have an MSD enhancer but maybe I'll buy TL at Daytona. I have a PFP or a...

SO, I have an RCW Havoc hull which I like so don't flame me, but the Power Factor Pipe chamber will not rotate 'up' enough to reach anywhere near the PFP waterbox - as it hits the top side of the hull under the handpole bracket, and so I need to have a custom box manufactured for this ski. I...

How much clearance should there be between the piston(rings) and power valve after cylinder bore? I can't find anything jetski specific - but notice on the dirt-bike and snowmobile forums 15~20 thousandths seems to be the deal. DASA 850SS Thanks in advance

Anybody know the original exhaust port height for a Dasa 850 stock stroke?

Hey guys, I actually see no issue with running this hull at all. I understand the company went out of business - but to be honest I'm not totally sure why. When searching all I find on RCW is a couple of large/deep threads but nothing stating anything about the company's demise... I really...

Does anyone know what brand/model drive coupler this is on my midshaft? I need to know so I can buy the dampener and the ofther coupler for the engine side. Thanks

Canceled. There are 2x other rides happening this weekend

Krash industries is going to put this engine into their complete skis now/soon/whenever. Has anyone had a chance to check out and test drive this engine? Thank you in advance. Eric

Hey guys, I've got a 62T-Y1 717cc cylinder that I don't know whats up or what it was meant for. I took it out of a '94 WaveRaider, but the cylinder's objective has got me stumped. Ive re-built it twice as I just can't get the squish dialed in correctly for my WB1 application. At 0.045"...

Once again folks; season is ON for the 2016 November Grab Yo Nuts ride! Date Range: November 18th through November 20th Launch location: Jacksonville Florida: Hugonut Park boatramp Address: 11080 Heckscher Dr, Jacksonville, FL 32226 Hotel / accommodations: Holiday Inn Express & Suites 10148...

anyone? I'll need to get my winter built going after sff.

The 62T came out of a 701 wave raider. Currently: 717cc (+1mm) Riva ported 62T cylinder ADA head running 165~170psi Squish band .045" (The cyl is decked but I'm running a .040 base gasket) Dual 38mm Carbs with ProK FAs Protec pipe Riva Purple CDI box (Advent? Adjustable rev limiter) Dual...

So I've got this 62T lump in a WB1: Basically a 701 WaveRaider base but modified: +1mm bore 718 woth ProX Pistons by LPW Riva cylinder porting Stock 38mm Mikuni carbs jetted with Ocean Pro FAs - 75p, 137.7m, 1.5ns, 95g, 1 turn Protec pipe ADA Girdled head with 35cc domes running 170PSI...

Hey guys, Im taking a long shot here. I'm wondering who sold me this Blue/White WB1 at Daytona back in January. I forget the fellow's name and handle, but I wanted to connect. He sold me a mostly empty WB1 hull with the gas tank, a WB1 waterbox, Midshaft and driveshaft, and half of the pump...

This is a Biennial event which I posted the first ride two years ago.... Georgia Jet Pirates presents to you - the remake - the sequel - the unbelievable GrabYoNutz November exlusive event in Jacksonville Florida at Huguenot Memorial Park, November 7-8 2015. Rain date: November 21-22. Launch...

I've got the following mods: :engine: B-Pipe, Hot products FAs Dual AFTERMARKET SBN44s (They have ~4 small pilot holes) R&D Intake manifold Boysend reeds MSD enhancer LPW ported 735 61x cyl Stock 62t cases ADA girdled with 34cc domes (190psi) 93 octane pump gase :pump: Hooker 9/15 Work intake...

Can someone give me a PLUG read? This is a 62t engine, Riva ported 62T cylinder bored to a 717 (701 +1mm). The ski is a 1994 WaveRadier. The pump is STOCK with the STOCK prop. Carbs are STOCK dual 38s with chokes removed much like a RN Superjet. There on top sits aftermarket OceanPro Flame...