Search results

Having a hard time getting it dialed in??? what does that mean ? Is it lean hesitation or Rich stumble ??????

I don't have manual in front of me but from what i rem. Start Retard only has effect up to 1000 rpms. So if your idle speed is at least 1000 rpm it has no effect on the timing curve.

pictures or it didnt happen...

Jetworks ported 718 Powerfactor (Dry) 50/50 pump & CHP 30 static 5000 begin retard 8500 rev 19 deg @ 7000

Might want to pull the starter out , reach in the starter hole with a finger and make sure the bendix is able to be turned freely and eliminate that from the equation.

only thing that could make this thread better is if we had a surprise visit from pancake :cool:

Looks like Scorn ruffled the Buzzards feathers!!!!!!!!!

Gil are you really going to the SFF? I think I might make the trip down I have family down the road in Cumming

Running TL on the rzr? : )

Gil .050 to .094 per msd instructions

thanks bad vin!

What does it look like then?

Forget permits thats only if you get caught. I'd be worried more about the DEP getting ahold of your little test pond, pollution from the race gas etc. Your talking about digging a pond that may or may not tap into the water table. Someone down the road with a well might be drinking MS109 for...

I am in Central NJ exit 8A off turnpike. You can see my work if you look in Hulls For Sale section, my 08 SJ is for sale right now. If your interested PM me and we can discuss it further. What kind of hull ? What kind of kit? You didn't buy full sheets? Kenny

I dont think he is talking about the gasket leaking but rather the bellow keeps popping off of the power valve top. Blair seadoo 800 and 951 motor did this all the time. I cant see by the pic but the bellow on the xscream setup is held on to the top by a circular band spring correct? If you look...

I just had the same problem recently. With low pop off pressure ( yours around 20 ) Mine around 21-21.5 and a motor that vibrates a decent amount sometimes from stiff non-oem mounts can cause the needle to leak or dribble as you have described ultimately introducing an excessive rich condition...

Yeah I tried that also just take a pc of .125 aluminum cut it in the shape of the red cross emblem bend the tabs up and your done. Dont worry about welding the corners as it is perfectly sound and lets the water drain out from underneath the box.

O btw I also angled my waterbox holder / box ever so slightly to point out towards the side of the hull rather than directly at the intake manifold. If I can help you any more let me know. Kenny

Gil Hope this helps..... 08 SJ Powerfactor pipe and water box on a 12mm ADA Gomez Powerplant. Only thing i did was drop the exhaust tube height when i re foamed the tray. I also picked a section of the stock exhaust hose that used the stock contours to get as much clearance at the carbs. Mine...