Search results

So I pulled this crank to rebuild a motor, and noticed that the "Mag Bearing cage"? Is cracked. This same thing happened to my 66V Crank, and in both cases the bearings are super smooth with no noise. What's going on that's making these fall apart?

Hey Guys, Im getting back to work on my B1 build, and need some opinions on my hood choice. I have this 1 piece lightweight hood that I planned to use, but Im not so sure if I like the look. I really like the weight savings, but if it throws it off, Im going to run the stock setup. Check it out

I rebuilt my friends 760 motor, and I am pressure testing it before install. I pressurize the motor to 10 psi, and it drops an average of .7 - 1psi over 10mins. After 20mins it drops about 2psi, and in 30mins it will drop a total of close to 3psi. Am I good, or should I be looking for a...

I have a set of 48mm D-Booster Novi Carbs, and there is a recess in the throat that was filled with something. Whatever was in there is gone, and I want to find out if this hole needs to be filled or is it safe to run like this? -Pic 1 shows a carb with no filling. -Pic 2 shows one with the...

I recently purchased a set of good used carbs for my GP1200R. I opened them up to check everything out, and found them to be newly rebuilt. I do not recognize the carb kits, and judging by the SILVER diaphram pin color they look to be WINDEROSA. I replaced the metering block rubber gasket (They...

I found a Kawi 750 Hull for $200 with pump and what the owner says is an aluminum pole. I am not sure if it is a SX or SXi, and I don't know how much this thing is worth. The current owner doesn't know the year, but will not budge on $200. What is the difference between an SX and SXi, and is...

This may be a weird requests for a PWC site, but I procure equipment for the US Armed Forces here on Guam. I need a quotation for a Bobcat Turbocat 5600, and two 3400's plus a few accessories. If Anyone here works at, or owns a dealership I would appreciate if you could contact me. Thanks,

Happy Fathers Day to all the Fathers here on the board!

Question for the standup guys. This SJ I'm messing with has an R&D pole bracket and it seems the pole sits lower than its supposed to. I have nothing to compare this to because both hulls I acquired have this bracket. What are the benefits of this thing? Thanks,

Check out this complete B1 hull I found in the jungle! It was getting graphics done by Mother Nature.

I picked up a used motor from a friend and he told me it was an old Judge motor from 02. -RIVA Ported and Epoxied Cases signed AK47 ( They look to be decked as well) -RIVA 61x Cylinder sleeved and marked 85.5 -R&D Flat Top Pistons (Comp is 220 psi) -Hot Rods Crank -Blowsion Girdled Head w/...

I have a question that I'm sure a bunch of people here can answer. Will Polyester Gelcoat adhere okay if applied to glass work that was done with epoxy resin?

Do 38 and 46 SBN's have the same adjustment screws. The high speeds look really close, but not sure. Thanks,

Check this motor out. Picked it up from a friend. Looks like 61x cases with a custom side draft and manifold (Maybe Kawi) welded to it. Someone school me on this thing. I'm thinking of running it in something if it is as good or better than t cases.

For sale is a Factory Pipe Mod Chamber and Ported Headpipe (with water injection nozzle installed). Originally came off of a 750 asking 400 obo shipped. Feel free to PM me with offers. All 3 screws turn freely!<br /> <br /> Thanks,<br /> <br />

Hey peeps, I pulled the pump off my Mod Hull after wrestling with the wall anchors they used to secure it, and noticed it has a stainless stator section. The wear ring is also stainless and is really thick maybe over 4mm. The bore measures 140mm, and the prop looks to be a custom pitch 13/18...

I just came across a mint Solas YB-SC-J Impeller for free 144mm 14.7-18.5 pitch. Could I run this in a B1 or would it bog me down? Thanks, Carlo

Please help me identify this pipe. Is it for a yamaha 701, or a Kawasaki 750. Any help will be appreciated. Thanks in advance! Carlo

Can someone please help me identify if this is a yamaha 701, or Kawasaki 750 head pipe Thanks in advance, Carlo

Hey Everyone, I have a Factory Pipe Limited Setup for a Kawasaki 750 SX/SXi. There are no holes or dents, and the pipe is complete with everything except the mounting hardware. Included in the sale are all of the 4 main components including the; - Manifold - Headpipe - Limited Chamber - Pipe...