Search results

I got a new big bore motor, went for a ride the other day. Im running dual cooling and I had put some 4mm restrictors in both bypass fittings (50 degree water) and the outlet temp felt pretty good. Well, I rode about 20 minutes and when I was in the inlet I noticed the bypass fittings spitting...

I have a 2008 superjet, about to get into reinforcing everything. I was wondering if it's really that important to reinforce the handlepole bracket for riding in the surf. I've searched for the past hour and haven't found anyone who has cracked a handlepole bracket. It would save me loads of...

Hey all I could just possibly be the most pickiest person. I have the brap strap from jetmaniac mounted "wilkey" style if any of you are familiar with this. It holds the hood great and seals pretty good against the fussy, thick watcon seal. My major issue with this strap (and possibly others)...

#Zero did my flywheel/nozzle and just recieved it today. He does great work and is always looking out. He recieved my flywheel on Friday and PM'ed me to tell me a washer to my bendix was sticking inside the flywheel and he will put it in a seperate bag when he ships it. Somehow he shipped it out...

Okay.. Funny how this all starts with just a solas mag pump and snowballed to doing motors, props, flywheels, mounts etc. etc. Modding these stand ups is half the fun. Here's the new set up I will have: 2008 Superjet 780 Big Bore (62t/62t) Dual 38 Mikuni Lightened Flywheel Ada Girdled Head MSD...

What is everyone using for cold water gloves? I don't want to install hot hands on my ski. I've been looking at the Patagonia R3 (3mm) gloves. Im concerned if they're going to give me serious arm pump. Otherwise i'll step down to a 1.5mm.. Water temps are 40F+ Air temps 40+

Hey all, I want to put a solas mag pump on my superjet. I am positive they are good since there's only one season on the ski. I never took apart a pump, if I use a press at work should it be no problem to swap them including the seals? If it'll be any problem what so ever i'll order all the...

I just want to make sure I got this right before I install these carbs back.. It's Mikuni 38 SBN carbs and im concerned about the fuel pump side. Alot of different gaskets/diapghrams in the genuine rebuild kit.. I have it assembled in this order, starting with the carburetor base: carb base...

I pulled apart my carbs earlier as off season maintenance.. There was no problems all season. Trying to decide if I should rebuild the entire thing with a genuine mikuni kit. It's the original stuff inside since it's only a 2008 with only one season on it. The mikuni kits have the fuel pump...

Hey all, im looking for opinions. I rode my 08 superjet alot this year and I don't like how it doesnt slide out the rear like my 750SX did. I feel like it's impossible to slide it without carrying loads of speed. For this reason I left the stock intake grate on and shortened my ride plate even...

It finally happened! Not too long ago I asked a bunch of you about financing a zx14. I went to a local dealer and found a ducati 848 evo instead, what a beautiful bike in matte white with red frame and wheels. I ended up buying it cash bc to finance requires full coverage which I was quoted...

Awesome, took long enough to finally make this sequel. Anybody else playing?

I want to get this right, it's going on a 08 superjet. I think I need the following; Billet Pole RRP Chin Pad RRP Steering Stopper Thrust Innovations +6" steering cable It's going on stock SJ bracket and using my Cold Fusion fat bar turn plate, with rrp bars, cold fusion throttle. Can I run a...

Okay, I have a 08 superjet with single cooling, factory limited pipe, ada head, msd enhancer. I just installed the head the other day and im thinking about how im running the cooling. I tried a few different ways.. Single line coming out from the rear, front runs a tad hotter Single line coming...

Im about to go buy a ADA head for my 2008 superjet with stock flame arrestors. Are there gonna be any clearance issues with the flame arrestor? I know I will have to remove the stainless brackets that go from the carb to the stock head. Anything else I should be expecting?

I figured i'd share what I did a couple weeks ago with a otterbox 2500 I ordered. It fits perfect and clearances my limited pipe. Very easy to remove/replace the box and it's tight underneath the strap. I got the stainless steel eye bolts from home depot, drilled 2 holes and glassed them in...

Finally went inverted yesterday so im just wondering if I can justify spending $110 on a blowsion brap strap and if anyone can give me some feedback on that. http://www.fastelements.com/p-450-blowsion-brap-strap.aspx There's not much info on it or any installed pics I can find through search...

Taken with gopro hero hd 2 on 1080p. I was on my new 2008 superjet this weekend, so far got quick steer, limited pipe, wcf footholds and some other misc mods. First time out, first time attempt at nose stab. Long video, skip to 6:00 and 8:00. I think I really need to pull up more on the holds to...

Trying to install my tiny tach, I came up about 1 ft short. Any way I can extend it? I found out it is coxial cable and im not familiar with it unless it's plugging into my TV. I read somewhere that door bell wire works, but no one else confirmed that. Any suggestions?

Hey all, I thought i'd pass this along. I got tired of these crappy EPA gas tanks that take forever to fill. I finally decided to get a VP fuel jug with the hose.. I just found at www.streetsideauto.com for $33.30 shipped with the hose. Use coupon code SmartShopper. I think thats just about the...