Search results

Dasa 1100 with lay down pipe wet and 49s with 155 skat mag pump. I ordered a 10/17 with 5mm set back repitched to a 11/17 loved it. ET 967 with lay down pipe wet and 46s used a 7/15 set back 5mm. Loved it. Hope this helps you out. Sent from my SM-N950U using Tapatalk

Amazon has clear cylinders which work great for making a gauge. Sent from my SM-N950U using Tapatalk

Pm sent Sent from my SM-N950U using Tapatalk

I have heard the buzz about the new 155 long blade prop so lets hear some opinions on them good or bad. One thing i have heard is the pitch sizing of a long blade is not the same compared to the pitch of a swirl prop. Im assuming the long blade will need a lower prop pitch due to the added...

Standard blade. Also need a 6/12 for 155 pump. Sent from my SM-N950U using Tapatalk

Bump still looking Sent from my SM-N950U using Tapatalk

Typically its water getting in through the orings due to age and or corrosion. Jetmaniac has rebuilt ones that are very good or you can try opening it up your self to see whats wrong. Dont bother with the ebay cheap ones they dont last. Good luck. Sent from my SM-N950U using Tapatalk

Looking for 12/18 or 13/19 prop for 155 pump. Let me know what you got. Thxz Sent from my SM-N950U using Tapatalk

Did I spell it wrong? Its the 760 ignition. Sent from my SM-N950U using Tapatalk

Looking for prop recommendations for a Dasa 1200 Ninja with a Skat 155 pump. Hull is a Circus with Zeeltronics ignition Spectrum 49s RRP pipe wet Any recommendation you have would be very appreciated. Thxz Sent from my SM-N950U using Tapatalk

I have used paypal many times to buy and sell skis. Typically several smaller payment have to be made or received due to the price of the ski. It helps if you have a good reputation on the X so people trust you. Or if a trusted person on the X vouches for you and the condition of the ski...

During quarantine we got most of the skis out for a pre summer ride and to make sure they all run ok. Sadly this is not all of them. LoL Sent from my SM-N950U using Tapatalk

You really need to check your squish to know for certain. These cylinders are usually from the 1990s and been machined many times over unless you have a newer sj motor. Sent from my SM-N950U using Tapatalk

Some guys do it to adjust the squish clearance on cylinders that have been decked on top. You can simply buy a thicker base gasket too. Jetmaniac offers many different thicknesses. Measure the two and see what thickness they are. Sent from my SM-N950U using Tapatalk

Jetmaniac has them. Sent from my SM-N950U using Tapatalk

I ran 7/15 thin blade with 5mm set back on prop and 89mm nozzle in Circus hull. I used 46 carbs too on my 967. Sent from my SM-N950U using Tapatalk

Looking for a set of high compression domes for a Dasa 1100. Thxz Sent from my SM-N950U using Tapatalk

I will have to look i believe i still have some left. Sent from my SM-N950U using Tapatalk

Yes thats one of my old personal motors. Heres a pic the day I installed it in my ski. And yes its sitting on the AC at my house. LoL.. I needed 1 last pic before installing it. Love that blue... Sent from my SM-N950U using Tapatalk

LMAO....... just block that one off so we can ride saturday. Sent from my SM-N950U using Tapatalk