Recent content by Skull NX Bones

X2 on jumping the starter.

I ride on the illinois river in Morris. Including this weekend

Jett's ski has foam in the upper portion of the gunwale. It's the bottom portion under the tray that has no foam. the question is, is it enough to keep the ski from sinking if it takes on water.

Awesome, simply awesome! Time to turn in the wetsuit for a spacesuit, you'll be launching into orbit with that bad boy.

I will say this, On my Street bike a Buell S-1 that is running higher than stock compression. It requires 93 octane when air temps are below 80-85° and 50/50 mix 93/100 octane when it's hotter. My bike also only has a 3gal tank and hits reserve at 2.5 (when I fill-up). I cannot use a...

I would pay hands down.

Fresh off the press. I wrapped over both the lower and upper castings on the pole. For the bottom casting/bracket I have several layers building up that area to add some additional strength.

Wanted to share my CF/Kevlar wrapped pole. Enjoy

No, electric box controls spark.

utilize the stock bilge line as the second cooling line. Then either use a Y or T type fitting inside your hull to connect second cooling line to your existing stock cooling line, if you set-up is stock. Or if running an aftermarket exhaust like a Factory B-Pipe, you will want to drill and tap...

Now your talking! Way to go Jeff!!

I fixed that problem when I reinforced the handlepole area. You may want to consider doing the same.

yes http://www.xftonline.com/ link to steering system http://www.xftonline.com/produtos.php?busca=15 Enjoy

all you can do is keep calling Jeff. You need to stay on him. He likes to say his shipping guy is getting it out today and he will call back with a tracking #. Don't buy it...call back later and ask for update. Jeff is a great guy and Waterdawg Kustomz is a great company, he just needs to...

XFT bearing system is much better than UMI.