Recent content by plaidward

How much ride time were you getting before and how much is it now with the clarity li-ion setup?

How much time are you getting out of that single battery?

PMed

@Baja 252 , I found the stinger jet was plugged as well, glad you told me to check that out! Once I get some more lines and a filter for the stinger,, I should have the routing AND the hot exhaust figured out.

Thanks again, got a few things to check, but I should have this figured out!

Like this. Hose from rear of chamber to front of chamber. Is that an inlet or an outlet? I thought both of these were inlets, so it wouldn't make sense.

My thought is to run cylinder 2 to head pipe, and the T that used to go to head pipe to the new inlet on the raddudes pipe. Then plug the old inlet?

Oh theres definitely 2 lines into the manifold, I double checked. 1 goes straight to the manifold. 2 goes to T, first T goes to head pipe, 2nd T goes to manifold.

Here's some pics. The last 2 are from an ebay ad, I think the top fitting is filled on mine, but the lower front and rear just connect to each other.

I went and double checked. Took a bit, but there's 2 inlets into the manifold. I'm getting an error on picture size, but this is my current routing. The blue is the raddudes modification, assume the other end is plugged. And the orange is my current routing with all the fittings that dont seem...

Thats awesome, doesn't look like anything routes to the cylinders. I'm guessing the water goes into the manifold and routes through the cylinglders from there and out the head? I'll have to look closer, but I only found 1 entrance into the manifold and didn't see the lower chamber spot or the...

Ok, I'm pretty sure the water lines on a newly purchased 1100 swap are wrong. All 3 lines from the head route to pissers. It has a rad dudes modified front exit pipe that has a line going from the old inlet to new inlet. Seems like that would make it run way too hot. ?? RH line next to...

So, any progress? Sent from my SAMSUNG-SM-N900A using Tapatalk

Cut the front a bit, didn't get after shot. Sent from my SAMSUNG-SM-N900A using Tapatalk

Uh, working on it. Geez. Sent from my SAMSUNG-SM-N900A using Tapatalk