mikesx's latest activity
-
MGot tired of doing the math every time I built a curve and potentially setting a switch wrong. Figured this can help some people in the...
-
M95 raider 701 62t, $800 with the trailer. My buddy wants the trailer and would split with me $400 each. Do you guys think this with a...
-
MYeah I think that’s an issue I’m gonna face. The hull part out is actually on here from November on the previous owners post. I don’t...
-
Mmikesx replied to the thread Help me build a Phantom.Consider buying a lay down pipe now and running it with a spray bar on that 61x. You’re gonna need the pipe for whatever motor you do...
-
MIt definitely is haha. I’m redoing that SN and it’s gonna take a while and I don’t wanna waste the motor or hull while I save up. I...
-
Mmikesx replied to the thread Help me build a Phantom.I agree that a 144 would be a better match for that 61x. However….. I’m going to bet that hull is setup with 155 shoe, so for less buy...
-
MI will 2nd that. A 7/12 will be wayyy too much pitch for a 61x. Honestly I wouldn't run a 155 behind a 61x at all. A 144 mag with a 9/15...
-
MAppreciate it, getting conflicting info though now haha. PO and another recommended the 7s to me.
-
Mmikesx replied to the thread Help me build a Phantom.If you’re using that 61x with an OEM 155 a 7/11 or 7/12 is going to be way too tall. I ran a 7/12 in an OEM 155 with an 898 PHP/PFP, for...
-
Mmikesx replied to the thread Billet stainless props. Has it been done?.In my biz pump shafts are always 400 or higher grade for exactly the reasons mentioned. We have had customers who couldn’t accept the...
-
Mmikesx reacted to Pro-pulsion's post in the thread Billet stainless props. Has it been done? with
Like.
A thought that comes to mind is that stainless aftermarket impellers are in the 400 series stainless because they're hardened. To harden... -
MI'm currently running this setup. Works pretty well, but my couch isn't that big.
-
Mmikesx replied to the thread Pump & Drive Shaft Alignment.Correct. Get yourself a Cold Fusion tool.
-
MMy view is anytime the pump comes off, realignment is required. That's because the shims only get you up/down pitch, not left/right yaw...