fastgtfairlane's latest activity
-
fastgtfairlane replied to the thread Please Help.If you cant get a shorter ride plate, another option would be try shortening the handle pole a little which will help get your weight... -
fastgtfairlane reacted to brapperdoodle's post in the thread Suggestions For Repairing Damaged Brass Hull Inserts? with
Like.
I've used these as drains for the tray, they are great but very soft. I'd use something like this, the underside is sealed already so... -
fastgtfairlane replied to the thread What should I do with this old square nose?.Put a decent 61x engine in it stock pipe and sell it. Would make a great first ski for someone
-
fastgtfairlane replied to the thread Help tuning/figuring out what Frankenstein ski I have….The original carb is a bn 38. You'll need to get a 44 sized intake manifold for the larger carb.
-
To offer up a (basically useless because I have never tried this at all) opinion: I'd put whatever the lowest pitch one you have in...
-
fastgtfairlane reacted to Qsportperformance's post in the thread Freestyle 2025 WDK weapon build with Like.
Coming back for an update: I've got the ski fully assembled and have 5 gallons through it. The head is re-torqued and I think I've got...
-
fastgtfairlane replied to the thread Superfreak -7 ride plate.Im running a cut down square nose plate on my -4.3 badass. Didn't have to drill any holes just cut flush to the back.
-
Superfreaks take superjet plates so maybe a squarenose stock plate cut down or i have a very extended round nose carbon plate that...
-
fastgtfairlane replied to the thread Krash 1200cc footrocket.Had a guy in our ride group that got one of the reaper 1200s back in 2022 or so. First weekend out, fuel pump wire came out had to...
-
Looking for a tnt super stock or limited b1 chamber. Could be c4 too. Pm me with what you have.
-
-
fastgtfairlane replied to the thread Small hub impellers scrap?.If you already have them, no reason not to try one. They dont load the engine as hard at lower rpms as a big hub swirl type impeller so...
-
Got to 42mph on phone gps and I started spilling my beer. Certified ripper.
-
fastgtfairlane reacted to DylanS's post in the thread BA Freak (155 conversion) & carbon circus with Haha.
-
A properly ported 650 with a decent pipe, head and a 44 carb will run circles around a small pin 750 in an X2 if it's set up correctly .
-
fastgtfairlane replied to the thread Need advise on 750 swap.The 650 will have better bottom than the big pin 750s. Post some pictures of your ski and pipe. Otherwise no way of knowing what you've...
