fastgtfairlane's latest activity
-
"B: Im not super interested in seeing how long it takes me to catch up to a jetski I got hucked off of doing 55-60." Uhmm... that SXR... -
fastgtfairlane replied to the thread Click/Clunk - No Crank.Had that happen before.
-
I was thinking that he might have two issues going on. A weak starter and the bendix teeth jammed / stuck with the flywheel teeth...
-
fastgtfairlane replied to the thread Superchicken wont hit max RPM.You dont want to go that low on the other impeller. The hooker is a big hub impeller which takes up volume adding more load on the...
-
fastgtfairlane replied to the thread Super Jet Blowsion Spring - Did I waste my $$$ and time?.Could also use a piece of rubber hose over the spring
-
Thanks @fastgtfairlane and @WFO Speedracer I have rebuilt the Bendix on the Super Jet type starters a couple of times, but never the...
-
fastgtfairlane replied to the thread Click/Clunk - No Crank.It sounds like your starter is going bad or has already failed. I used to take them apart and basically clean the commutator which is...
-
fastgtfairlane reacted to yamanube's post in the thread Super Jet Blowsion Spring - Did I waste my $$$ and time? with
Like.
Put a limiting rope on it and tighten your bolt down a bit. -
fastgtfairlane reacted to DylanS's post in the thread BA Freak (155 conversion) & carbon circus with Like.
I just couldn’t leave it alone
-
One thing that helped me was holding the handle pole low, like resting on the hood. When you're approaching the wake, take the final...
-
fastgtfairlane reacted to DownHillWilly's post in the thread Paul Lehr Performance - LPW - Jr. with Like.
Paul did the port work on my 760 and supplied the pistons, etc. and even recommended jetting specs for my build. The ski runs...
-
fastgtfairlane replied to the thread Basic maintenance for aftermarket motors.I run a heavier oil mixture than most which is about 34:1. I also try to fog the engine after every use to try to eliminate moisture...
-
The big pin 750 cylinders make less low rpm torque than 650s do. Solas finally made their 750 small hub concord impellers very flat but...
-
Well I thought I was going to get away with using non OEM starter from Parts Unlimited.... I knew better! only got 45min ride in and...
-
fastgtfairlane replied to the thread Nosestab feedback.Nose stabs are that one trick that everyone does a little different. Everyone has their own flare to it. My favorite is off a big wave...
-
