E350's latest activity
-
E350 reacted to DylanS's post in the thread Other What did you fab up today? A thread for the home fabricators! with
Like.
Material cost ; Harbor freight welder ; 70 bucks Stealing from the shop at work ; free Total weight about 30lbs Edges? Sharp Round? Not... -
E350 replied to the thread The Opposite of Bogging FX-1/Super Jet.Well, I spoke with Joey at High Speed Industries today and he informed me that MSD tested the FX-1's Enhancer and found that it was...
-
E350 reacted to WFO Speedracer's post in the thread So your Yamaha 701-760 won't start ( what to check before making a new thread) with Love.
Unplug the stop switch, I know what you are going to ask, which wires, and where are they at, ok here goes the wires are a black and a...
-
-
Little show we did this weekend at a local motorsports festival.
-
this is incredible
-
It only took my entire body weight and a 40” breaker bar… I swear that shaft twisted 180 degrees!!!
-
E350 replied to the thread What's your view look like today?.Congratulations! The goal of your job and its environment make me think of this song:
-
I got a buddies 550sx dialed in back in the spring. 120 main 110 pilot 2.0 N/S 95g spring iirc It's stock porting, stock motor, stock...
-
E350 reacted to WFO Speedracer's post in the thread GP 1100 with 1200 cylinders port matched with Love.
It sounds to me like your popoff is too high, popoff controls the midrange circuit which is where you are having issues , you left out...
-
Absolutely you can make power at high RPM with a lower exhaust port as you are talking about. However, the power is not coming from the...
-
I could do that, but the reality is these engines are very similar and will end up tuning much the same. Personally, if you want to...
-
E350 replied to the thread Another Seized Impeller.Pump down, shaft up. Heat up the coupler. Fill up the coupler with PB Blaster (I will buy some Kroil per WFO's suggestion). Let it...
-
Well, it’s hard to explain why I needed to remove this prop but I wanted my FX-1 pump back that was currently in another ski and this...
-
Sorry for the thread derail Brapp. If your goal is to salvage/reuse pump, shaft and prop I’d try taking a 5/8 threaded SS rod coupler (...
