Recent content by Camm08sj

pistons in the wrong way.

wat hull/engine was jerry running? very impressive.

point to the trim leaver and throttle leaver an ask, "is this the clutch and front brake"? ahh no.

wat is the biggest size engine you can run with a kawi 140mm skat trak mag before going up to the next size? iv brought a second hand q8 hull that came with a 140mm mag with a 13/18 wich im guessing will be to small and to lower pitch to run my 10mm ada 1000cc with total loss and black jack 44s...

do thrust make an easy pull to suit kawi?

has anyone done a back to bak with a 1000cc dasa and a xmetal 1000cc? cant wait to see how the dasa 1100 stacks up next to the new xmetal 1200.

hey kieran i can flip a gw hull with trim off a crappy boat wake, the engine set up was just a ported 701 with 44s and a std ignition. i think your eme will flip off a boat wake with that set up without an issue. if your going to get an engine built art is your man his 4mm strokers are the...

im running 44mm bjs on a std oem manifold with the crossover filled, i told art wat my setup is and he jetted it perfectly, i didnt even need to touch the screws. my motor is a 10mm 1000cc ada with total loss running race gas. when art sugested to run 44s with this setup i was i bit suprised...

a few pics to get an idea

i think the brain is earthing out on the aluminium backing plate, becouse when the brain is un bolted it runs then bolt it bak up the light turns on and it has no spark. has anyone else had this problem?

got a msd pro digital ignition thats deciced to take dump on me after 200 litres of avgas from new, the red light turns on when i switch it on then flashes when im turning it over but has no spark, as far as i know all conections are fine, if it was a dodgy pick up would the brain still be...

wat length cone is he running on the tbm? and wat kind of 1000 will you be running? im hoping to get away with a stock pump on my 10mm ada too.

ross and pierre are both awsome dudes, seeing pierre pull a super flip was insane!! and then they both had to push start my car the sarvo coz i had a flat battery, cheers boys!!!!!!:beerchug:

hey watty i plan on hooking up the trim on my 08 as well wat trim cable you gona use? are you puting this setup on your xft or your sweet sn?