Part number for longer throttle cable for boysen manifold

[jetpilot08]

Any body know which throttle cable or part number I need to work with the boysen intake manifold?

 

[GIL]

Any body know which throttle cable or part number I need to work with the boysen intake manifold?

I use the cables for a 1992 Kawasaki 750sx. By using this cable you no longer need the adadptor for your trigger, the cable is plenty long, and the cable is MUCH beefier! Oh and did I mention that retail is around 25.00 ???

 

[McDog]

Jetskisolutions sold me a new kawi one for cheap. You have to dremel out the manifold to fit it though since it is a larger diameter than yamaha.

 

[jetpilot08]

I use the cables for a 1992 Kawasaki 750sx. By using this cable you no longer need the adadptor for your trigger, the cable is plenty long, and the cable is MUCH beefier! Oh and did I mention that retail is around 25.00 ???

Thanks gil. I'm not sure why but yamaha seems awfully proud of their throttle cables. They seem to rage from about $95 to $118. They must be rick roy throttle cables.

 

[jetpilot08]

Found one at AJS for a 92-95 750 sx for around $29....looks like superjet cables are going for around $76.... WTF? Must be made of platinum.

 

[SuperJETT]

Yep, I use an SXR cable, much beefier and less than 1/2 the cost.

 

[sflsurfrider]

...a raider cable has plenty extra length if you can find one.

 

[GIL]

Found one at AJS for a 92-95 750 sx for around $29....looks like superjet cables are going for around $76.... WTF? Must be made of platinum.

That is the one I run in both of my round nose sj's.