MS109-I finally tried it! WOW

GIL

GIL

Power In The Hands Of Few
Location
Cullman AL
I finally tried VP MS109 in my ski yesterday and all I can say is WOW and dammit man! It looks as if though my annual fuel budget just got shot to hell and back!

I swapped carbs w/crammit because his carbs are set up for the MS109 and put approx 3 gallons of MS109 in my tank and 3 different people said WOW. Then put my BJ's back on thinking the ski would not even run (due to the fact that myh BJ's are setup for 100LL) and it was still awesome w/NO tuning! I can't wait to get on the MS109 bandwagon full time! AWESOME fuel !!!
 
Waternut

Waternut

Customizing addict
Location
Macon, GA
I've never heard of VP Ms109 before but isn't 100LL really just a lightweight fuel and not comparable to 100 octane race fuel anyway? Sounds more like you just unlocked that extra compression with an appropriate fuel.
 
GIL

GIL

Power In The Hands Of Few
Location
Cullman AL
Waternut said:
I've never heard of VP Ms109 before but isn't 100LL really just a lightweight fuel and not comparable to 100 octane race fuel anyway? Sounds more like you just unlocked that extra compression with an appropriate fuel.
Click to expand...

100LL is most defintiley african american race gas. lol
 
SUPERJET-113

SUPERJET-113

GASKETS FOR CHAMP BRAP!
Location
Lake Havasu City, AZ USA
Yeah, AV gas sucks and is a waste of money.
At least MS109 is real fuel for on the ground applications..lol
I was just bustin Gil's chops, thats all. :biggrin:

I run Sunoco 110 from out of the pump here in Havasu. I can also get VP105 from the pump too.
 
GIL

GIL

Power In The Hands Of Few
Location
Cullman AL
wsuwrhr said:
Be careful using oxy fuels in a two stroke bud
Click to expand...

Fear not, I have a pretty smart Mexican and a pretty smart half i can helping me out. Between Art Gomes and Crammit I don't have much to worry about other than spending money. lol By the time I get done I will have the grandmaster spankmaster. lol One of these days I will win the lottery and get you to send Art some cases, a crank, a cylinder and then I will own the GMSM. I rode a ADA done by Art yesterday that was a 8mil X 89 mil and so far, that was the most awesome motor I have had the pleasure of riding. If u recall, I got to ride another motor just a few weeks ago that should whoop up on the ADA pretty hard and if I had the coin to buy one of the 2-it would be the ADA by Art hands down. I would have thought the 260psi 1009cc motor would have killed the 945.6 200psi motor and that was not the case. I think Art has got something figured out that everyone else wishes they could figure out.
 
vitalikol

vitalikol

Jetski-Snowboard
Location
Pennington,NJ
Go Art !!!!:cheer2::arms::cheer2::arms::cheer2::arms::cheer2::arms:

I'll be snding him my sxr jugs for porting and two 46mm Mikunis for BlackJacking next week.
 
McDog

McDog

Other Administrator
Staff member
Location
South Florida
GilGoneRound said:
Fear not, I have a pretty smart Mexican and a pretty smart half i can helping me out. Between Art Gomes and Crammit I don't have much to worry about other than spending money. lol By the time I get done I will have the grandmaster spankmaster. lol One of these days I will win the lottery and get you to send Art some cases, a crank, a cylinder and then I will own the GMSM. I rode a ADA done by Art yesterday that was a 8mil X 89 mil and so far, that was the most awesome motor I have had the pleasure of riding. If u recall, I got to ride another motor just a few weeks ago that should whoop up on the ADA pretty hard and if I had the coin to buy one of the 2-it would be the ADA by Art hands down. I would have thought the 260psi 1009cc motor would have killed the 945.6 200psi motor and that was not the case. I think Art has got something figured out that everyone else wishes they could figure out.
Click to expand...

Are you talking about Kevin's ski? I rode it and it is awesome.

Is the 1009cc motor the x-scream 1000?
 
GIL

GIL

Power In The Hands Of Few
Location
Cullman AL
mcdog said:
Are you talking about Kevin's ski? I rode it and it is awesome.

Is the 1009cc motor the x-scream 1000?
Click to expand...

I am talking about Kevin's ski. That motor is AWESOME!!! Now we just have to get hm on the MS109 and get him to leave the dam headpipe screws alone!!!:spank:J/K
 
Last edited:
steveyz250fpilot

steveyz250fpilot

Banned
Location
Huntsville, Alabama
GilGoneRound said:
Fear not, If u recall, I got to ride another motor just a few weeks ago that should whoop up on the ADA pretty hard and if I had the coin to buy one of the 2-it would be the ADA by Art hands down. I would have thought the 260psi 1009cc motor would have killed the 945.6 200psi motor and that was not the case. I think Art has got something figured out that everyone else wishes they could figure out.
Click to expand...


Say it ain't so? Don't, Don't, Don't believe the hype!
 
2

2XLR8

X-
Since they don't live too far apart maybe a smack down is in order. The engines are so different, 260 psi, power valves, Power factor pipe.
 
GIL

GIL

Power In The Hands Of Few
Location
Cullman AL
2XLR8 said:
Since they don't live too far apart maybe a smack down is in order. The engines are so different, 260 psi, power valves, Power factor pipe.
Click to expand...


I am not discounting the 1009cc motor at all-it is awesome. The 1009 hits hard, pulls long, is snappy, won't load up, and has more torque then a Kenworth. The JW 950 is simply unbelievable and to date-the most awesome motor I have ridden. I want it!!! I am amazed that the 950 with a B pipe and 'racing carbs' and the wrong cylinder was soooooo strong.
 
You must log in or register to reply here.
Top Bottom