wsuwrhr
Purveyor of the Biggest Brapp
- Location
- Alta Loma, working in Upland
Anyone want one?
Brian
Brian
Last edited:
Snapped a shot at DASA while walking by with a camera
- Thread starter wsuwrhr
- Start date
wsuwrhr
Purveyor of the Biggest Brapp
- Location
- Alta Loma, working in Upland
Let's see, what do we have here?
We got:
Kawi cylinders,
Yami cylinders,
5 port big bore stroker,
7 port big bore stroker,
7 port big bore stock stroke,
We got:
Kawi cylinders,
Yami cylinders,
5 port big bore stroker,
7 port big bore stroker,
7 port big bore stock stroke,
OCD Solutions
Original, Clean and Dependable Solutions
- Location
- Rentz, GA
Well, if they're just sitting around...
wsuwrhr
Purveyor of the Biggest Brapp
- Location
- Alta Loma, working in Upland
ATS_Aaron
X-
- Location
- Shady Shores, TX
Isn't that is like $100,000 sitting there?
BTW the 7 port "big bore" is the 85mm stuff. All the 89-91mm big bores are 5 port, right?
Aaron
BTW the 7 port "big bore" is the 85mm stuff. All the 89-91mm big bores are 5 port, right?
Aaron
wsuwrhr
Purveyor of the Biggest Brapp
- Location
- Alta Loma, working in Upland
Tapping away on a calculator.....
HMMMMM........not quite.....but essentially worthless until finished....
Yes sir.
Last edited:
wsuwrhr
Purveyor of the Biggest Brapp
- Location
- Alta Loma, working in Upland
Someone needs to take a damn washrag to a machine. Embarassing....
Gunter83
Trainwreck
- Location
- Greenville, SC
I think i made a mess on my keyboard
stanton
High on jetskis.
- Location
- atascadero,ca
its just a haas:smashfreakB:
ATS_Aaron
X-
- Location
- Shady Shores, TX
I don't judge. Our shop is a total pit. Summer is so hectic that cleaning/organizing gets pushed way back.
Our local shop that builds our turbo adapters for our MR2 turbo kits had a manufacturer's rep out there a week ago. Apparently their 5 axis machine was ATTACKING (and nearly destroying) our adapters about 90% of the way through the process...like you said "worthless until finished." I know they got it fixed, but I didn't ask what the problem was. We've made several hundred of them so it shouldn't have been a programming problem at this point.
How many of the BIG bore strokers like mine are out there? I think mine was a pretty early one because Kyle realized my pistons were touching my domes and changed them a little. Also the interference fit between teh domes and the head shell was TIGHT. He was supposed to recut to fix that, but I have never pulled them out to test since then.
Aaron
wsuwrhr
Purveyor of the Biggest Brapp
- Location
- Alta Loma, working in Upland
Yea, right, "muddy hole", or is it "muddy place" I forget.
Laughs.
Don't believe everything you hear, sir.
Brian
Last edited:
wsuwrhr
Purveyor of the Biggest Brapp
- Location
- Alta Loma, working in Upland
Aaron,
1. I hate when that happens....nothing like throwing away parts/endmills when shiz goes bad on a CNC machine. I have a saying, "The only thing CNC's are better at than convention machines, is phucking up more parts faster."
2. Many....We have been building the billets since mid '06 I think.
Your shell may be .001-.002 too small. Tight is good, you know what I am sayin?
Brian
1. I hate when that happens....nothing like throwing away parts/endmills when shiz goes bad on a CNC machine. I have a saying, "The only thing CNC's are better at than convention machines, is phucking up more parts faster."
2. Many....We have been building the billets since mid '06 I think.
Your shell may be .001-.002 too small. Tight is good, you know what I am sayin?
Brian
Last edited:
wsuwrhr
Purveyor of the Biggest Brapp
- Location
- Alta Loma, working in Upland
Kinda funny, there is even a bottle if simple green parked on top.
Must have been a case of the Fridays.
Brian
Must have been a case of the Fridays.
Brian
- Location
- Houston/Galveston
NO NO. dirty machines and shavings on the floor only mean one thing. WORK WORK WORK. Its much better than sweeping dust!!
OK I will take one of the Yami cylinders!!! You got my address right?
wsuwrhr
Purveyor of the Biggest Brapp
- Location
- Alta Loma, working in Upland
Um....sure..
I didn't get your check though....how about a credit card....:love::love:
- Location
- Houston/Galveston
How about I come wash that machine.. even trade for labor. :439:
- Location
- Lake Orion, Michigan
damn.... mass producing means now cheaper, correct? 
I know one of those Kawi Cylinders is off to Kommander Industries for my buddies build. Can't wait to see it in person!!!
I know one of those Kawi Cylinders is off to Kommander Industries for my buddies build. Can't wait to see it in person!!!
wsuwrhr
Purveyor of the Biggest Brapp
- Location
- Alta Loma, working in Upland
For the cylinder they way it sits? You know the old saying, "Be careful what you wish for...."?
Well it isn't THAT dirty is it?
haha
Brian
wsuwrhr
Purveyor of the Biggest Brapp
- Location
- Alta Loma, working in Upland
We have been producing them the same, on the same machine, since '01-'02, and even through switching to the billets.
You are correct, sir.
Brian
You are correct, sir.
Brian
damn.... mass producing means now cheaper, correct?
I know one of those Kawi Cylinders is off to Kommander Industries for my buddies build. Can't wait to see it in person!!!
Anyone want one?
Brian
OK, so, where's the icon for wiping drool off my face?