SN v2
- Thread starter brentR
- Start date
- Location
- Midland, Ontario, Canada
I know..I know...geez...at least the footholds are in...all thats left is turf and reassembly so it should go quick.
Have fun this weekend...forecast is saying its suppose to be pretty nice...will still be cold but tolerable.
Have fun this weekend...forecast is saying its suppose to be pretty nice...will still be cold but tolerable.
- Location
- Midland, Ontario, Canada
For now...
61x/61x
180 PSI
FP B limited
FCV
SBN 44
nothing wild but should be reliable and enough for me.
61x/61x
180 PSI
FP B limited
FCV
SBN 44
nothing wild but should be reliable and enough for me.
- Location
- Midland, Ontario, Canada
Not right now...I got a 13/16 concord cutback 3mm...but i have a few things coming up soon and may be able to use it...I'll keep it in mind.
- Location
- Sweet Valley, pa
your just wasting your time not buying a kawi
D-Roc
I forgot!
- Location
- Dirty River Rider
what happened? pssssst. hylomar.
D-Roc
I forgot!
- Location
- Dirty River Rider
really? shiat. what do you suspect is leaking?
D-Roc
I forgot!
- Location
- Dirty River Rider
just rejet it. lol. crap you will never make it to the river ride this weekend at this rate bahhhhaaa. i have reused base gaskets with some hylomar on them but i try to put all the bolts in. hehhee.
i officialy give up (for today)
i used rtv sealant on cases, base gasket and both intake gaskets and still compression that flutters
either this head is fubar (riva girdled) gonna try a stocker with gasket or my rings are ********ed. i pull cylinder up to see if the bottom ring is seated and its fine but couldnt see top ring
my hands hurt.
i used rtv sealant on cases, base gasket and both intake gaskets and still compression that flutters
either this head is fubar (riva girdled) gonna try a stocker with gasket or my rings are ********ed. i pull cylinder up to see if the bottom ring is seated and its fine but couldnt see top ring
my hands hurt.
D-Roc
I forgot!
- Location
- Dirty River Rider
you should really use yamabond or 1211 or permatex motoseal on the cases. hylomar on the used base gasket. do you have low compression of can you hear an airleak while it is compressing. if it is an air leak spay soapy water on it and look for the bubbles. if you buy some rubber frost plugs you can do a leak test.