DASA865ss 4mm stroker or ??

[Bsgreen83]

Beginning research for next year (or later)
Currently run a DASA865ss PV motor.
DASA said my only real option is a 4mm stroker crank. Said port timing wont allow anymore than that.
Any opinions/thoughts ideas/suggestions for future upgrades?
I have a ton of practice to do first of course. The boat is FW flip capable and I will get there by end of season. Just have a feeling Ill want more height eventually. So looking at ideas for more Powah!!

 

[Jcary85]

What’s the rest of the setup? Pipe/carbs/ignition? What compression?

 

[Jcary85]

Actually I think u mentioned b pipe and enhancer in another thread. Before touching the motor, get a programmable ignition (zeeltronic, MSD TL or something else). Then get a lay down pipe. If you are on pump gas domes, try slightly higher compression domes for like a 1 to 4 race to pump gas mix. The ignition and pipe will really wake it up. Then see if you still want more motor

 

[Big Kahuna]

Learn to ride what you got until the motor is holding you back.

 

[Bsgreen83]

You are very correct sir. Working on that.
But when I cant ride I research

 

[Bsgreen83]

What’s the rest of the setup? Pipe/carbs/ignition? What compression?

Yes B-pipe limited chamber xscream mod, MSD enhancer lightened stock flywheel, dual DASA 48mm carbs, high comp domes running on 110.
Its no slouch and Im not complaining.
Just having fun with it all and planning for future.