Aftermarket reduction nozzle

[Wetbuffalo]

Who made the aftermarket reduction nozzle for 144/148 pumps that looked like 65v 5 degree up nozzle? Some research I have done says pro-tec but the pictures of the ones I am seeing look closer to a 62t one and not the bowl like look of a 65v. Thanks!

 

[TheBuzzard]

protec for sure. I got one in front of me

 

[Wetbuffalo]

protec for sure. I got one in front of me

Could you pm me some pictures?

 

[MTRHEAD]

Protec 144 I have is straight out. The GP760 nozzle is about 5 degrees up

 

[Wetbuffalo]

That’s what I have been trying to figure out. It seams to be that there are 2 types.

 

[Yami-Rider]

Pro-tec made a straight and 5 degree up. I own a 5 degree up

 

[Wetbuffalo]

Pro-tec made a straight and 5 degree up. I own a 5 degree up

How do you like it? Are you able to open it up more then a oem 5 degree up?

 

[Yami-Rider]

I've never used it, it's one of those projects I've never gotten around too. Yes, it can go a good bit bigger then OEM 65v. There are max size measurements somewhere here on the X. That's the reason I bought it.

 

[SmittySX]

Never knew that protec made a 5* nozzle. I appreciate the info.

 

[Yami-Rider]

Looks like the pro-tec is 6 degrees. Here's that chart.