X2 Scat Impeller Seal Question

[Mike W]

I'm a total newbie when it comes to Kawasaki's and have been searching here and the inter webs but not really finding my answer. So here is my question. I have a bone stock 95 X2 and I'm changing out the impeller to a Scat. The stock impeller has a seal but the Scat does not. Is there a way to remove the seal from the stock impeller and install it in the Scat? Which seal is the correct seal for this impeller? Any quidance here is much appreciated.

 

[Jafaboy]

Newer/most Kaw skat's take an o-ring if a groove is cut?

Just spoke to impros today, and found early ones used the kawi seal.

Give them a call or email and no doubt they can send you which ever you need.

 

[Mike W]

Newer/most Kaw skat's take an o-ring if a groove is cut?

Just spoke to impros today, and found early ones used the kawi seal.

Give them a call or email and no doubt they can send you which ever you need.

I called Scat after I posted this and they are sending me two different seals for the later and current impeller designs. At no charge nonetheless. I'm pretty impressed with their customer service.