Super Jet jetworks modded 38's jetting help

[jetx]

Now before everyone says contact Art, I'll say I have already sent him an email a couple weeks ago with no response and another email again today, but hoping someone might have this info handy. If I don't find what I need here I'll have to call him, just real hard to find time during the day.

So here is what I wil be running...pretty basic so hoping someone can help

stock 701 with 62t cases and 61x cyl (no porting)
protec head approx 175PSI
protec cdi
lightened stock flywheel
b pipe
stock airbox
jetworks modded 38's with filled in crossover intake manifold

jets that are in there now are 80 pilot and 122.5 main.
Any help would be great, trying ot get these setup asap.

 

[motoman96]

Call him tomorrow

(949) 331-8279

 

[Bobert540]

Call him tomorrow

(949) 331-8279

X2, just leave a message if he doesn't answer. He calls me back always the same day.

 

[58vwragtop]

Just make sure you leave plenty of time to talk to him........the guy will talk for ever. But he really knows how to set a ski up great.

 

[motoman96]

Best is when he starts making sound effects.Lmfao

 

[jetx]

Haha...ok, looks like I'll half to make sometime to call him. But in the meantime if anyone has any useful info please post it up.

 

[motoman96]

Your main jet seems way too small. B-pipe instructions says to use a 135

 

[GIL]

jetx-what jets did Art put in them? Did you have Art do the carbs or did you buy them 2nd hand? Just trying to get enuf info to help.
What fuel are you running? Pump? Prop?

 

[motobehrens]

Throw them on and see how it runs. It looks pretty close. Maybe go up on your main. My Jetworks 38's were delivered with 82.5 and 127.5, though I ran 82.5 and 125 most of the time. My ski was similar, but with some cylinder work, Flame arrestors, and enhancer. 1700ft elevation. Hope that helps.

 

[jetx]

Bought the carbs used...guy said he had some cyl work done. Gonna just be running pump gas 94octane.

 

[jetx]

Prop is a Solas concord 13/16 cut back 3mm