Blaster Bought (2) '96 Blasters

[badtnine]

New to this site, I have been reading for a while and decided I needed to step up. I got these two Blasters awhile back and really just toyed with them.



Nearest one has only what she was born with.



One in back has a few mods



I can't identify the impeller, but, I know it's not stock. Both have stock intake grates and ride plates. Since I am new to riding, if anyone has any comments or suggestions please don't hesitate. Thanks.

 

[blaster800]

The more you mod it ,the more you will enjoy it - Power is your friend on the B-1 ... enjoy

 

[badtnine]

The more you mod it ,the more you will enjoy it - Power is your friend on the B-1 ... enjoy

Thank you... Can someone get me up to speed on cylinder pressure? Previous owner said he had the head "milled" and to only use 93 octane or better fuel. Yet, stock heads on both. ADA head good for me? If so what dome?

 

[ItsRixter]

Take off those d@mn oil tanks and pump and run premix!!!!

 

[Dustin Mustangs]

Stock compression is 150. Limit for pump fuel is 180 for an unported motor. Gauges vary so if you are off a bit from those numbers I wouldn't worry too much about it as long as you are even between the holes and the milled on is about 30 psi higher. If you have a milled head I wouldn't bother with an ada or other until you port the cylinder. The only thing you stand to gain is bling.

 

[b.lee]

If you have a milled head I wouldn't bother with an ada or other until you port the cylinder. The only thing you stand to gain is bling.

x2

 

[badtnine]

Take off those d@mn oil tanks and pump and run premix!!!!

Cool, will do... Suggestions on pre-mix ratio and oil type???

 

[AKIN187]

I run 50:1 dominator amsoil in mine.