Hey guys, I've had a 91 x2 for a while sitting around because the top end went bad a while ago and finally decided to fix it. bought a 96 Kawi zxi with the big pin so I could use the motor out of it. Finished putting it in the X2 and I wanted to keep the 650 electronics because of how big the 750 electronics are. But I am confused on how to wire the 5 wires coming from the engine by the flywheel to the 5 wires coming from the electrical box because the colors are all different. If anybody could help id appreciate it or any other ideas
X2 Big pin 750
- Thread starter cade_dutt
- Start date
- Location
- St Charles IL
so your running the complete 650 electronics correct? (stator, flywheel, & ebox)
- Location
- St Charles IL
not sure you can do that... just run the complete 650 electronics...
- Location
- St Charles IL
yea its the way to go
only mod you will have to do is tap the hole on the cases for the stator wires to feed thro
only mod you will have to do is tap the hole on the cases for the stator wires to feed thro