What waterbox is this?

[yamanube]

Anybody have a picture of one out of the hull?

 

[SuperJETT]

Looks like a stock SXi box to me.

 

[yamanube]

How is the outlet oriented in relation to the inlet?

 

[snowxr]

The outled us up behind the ignition. There is also a wierd shaped bulge on the back to clear the tray. I think that is a FPP waterbox for 750sx

 

[yamanube]

So it points sideways towards the opposite side of the hull then?

 

[SuperJETT]

So it points sideways towards the opposite side of the hull then?

Yes, toward the opposite side but angled up slightly.

 

[yamanube]

Thanks guys.

 

[snowxr]

:burnout:That'll be $10

 

[yamanube]

:burnout:That'll be $10

Check is in the mail.

 

[snowxr]

Sweet, I'm hood rich!

 

[SuperJETT]

Like this, but in 95 they switched to aluminum boxes which were way better.

 

[snowxr]

Now Jett gets a cut.

 

[yamanube]

Now Jett gets a cut.

Once you get the check feel free to send him his half.

 

[SXR-FOREVER]

'nube if your looking for one I have one in a box somewhere I believe

 

[yamanube]

'nube if your looking for one I have one in a box somewhere I believe

Nah, I was hoping the outlet was 180 degrees from the inlet then I could flip it over and put it in the back corner of my SJ to quite down the 800.

 

[Cannibal]

I have a turbomuff if that would help you. It's 90* but pretty small. Can take a better pic and/or measurements if you want.

 

[SXR-FOREVER]

I assume you already looked into the PJS silencers? I bet two inline with eachother would quiet that down alot.

 

[yamanube]

There is not very much room between my carbs and the side of my hull (actually touching the rubber exhaust tube) so an inline silencer really wont fit. That turbomuff won't work either, I need something where the inlet and outlet are inline with each other (or close). Really I want more of a water trap than a silencer, I could care less if it gets quieter.