I am doing a ton of work to my ski before I ride this season and I want to move my bilge to under my driveshaft. Right now my bilge sits between the flywheel cover and tank. It pumps out water but there is always gonna be something in there and I don't want that as I'll be benching my used and abused 650 for a tuned up ported 701 this year. Can I get some bilge options that are known to fit under there?
Super Jet What bilge?
- Thread starter mthomps
- Start date
OCD Solutions
Original, Clean and Dependable Solutions
- Location
- Rentz, GA
It doesn't appear that anyone is still making or selling the bracket that bolts to the SN midshaft. You might get lucky and find a used or old stock one or your next best option is to clean and prep the hull so you can epoxy one down.
Last edited:
- Location
- Denver, NC
http://pages.ebay.com/link/?nav=item.view&alt=web&id=141459404884
Either that or glue it down!
Sent from my iPhone using Tapatalk
Either that or glue it down!
Sent from my iPhone using Tapatalk
OCD Solutions
Original, Clean and Dependable Solutions
- Location
- Rentz, GA
He said 650 so I assumed it was a SN.
OCD Solutions
Original, Clean and Dependable Solutions
- Location
- Rentz, GA
The Rule 500 is the shortest pump I am aware of and it still won't fit directly under the shaft. Gluing it down off to the left hand side is the most common option but it will require you to relocate or remove the stock siphon bilge.
Thanks, that seems like a reasonable option. I am going to be running a 2014 pump stator which has no stock siphon and I plan on blocking off the inlet for it in the haul anyways.