FX-1 Stock Carb Jetting for Factoy Pipe FX1

[ISC123]

Anyone know this??? I looked on factory pipes website and couldnt find anything except superjets and waverunner III's......Who the F...puts a pipe on a waverunner III???

Sorry if I offended any waverunner III owners on here.

 

[xXx Octane xXx]

Main jet : 145
Pilot Jet : 120
High speed screw : 1 1/2 turns out from closed
Low speed screw : 2 1/2 turns out from closed
Needle & Seat : Stock
Spring : 95 gram

 

[AndyL]

I think thats for an aftermarket arrestor according to the factory page.

 

[95FX1]

my stock manual says screw turns out should be:

low 1 7/8 with a plus or minus of a 1/4 turn
high 1 5/8 with a plus or minus of 1/4 turn

thats STOCK and i have my low set near 2 with stock arrestor and its rich..lil bit to rich by a 1/8th prolly......but very snappy