Selling my 2017 full carbon WDK Rip hull with pole, 155 pump, trim, etc. Will include the following:
-Registered and titled in my name in North Carolina. It is titled as a Rip and has a Hull ID number.
-155 OEM pump with driveshaft and 7/12 Skat prop
-Midshaft and midshaft housing
-Thrust trim with lever and cable
-KP Pole and KP steering and steering cable
-Bars and grips
-Motor mounts
-RRP intake grate
-Exhaust hose
-Cooling lines
-Spare brand new, never installed, ride plate from WDK. The current installed ride plate had a very small crack that I reinforced with 2 layers of 1208 biax and haven’t had any issues, but I will also include the spare brand new ride plate, as well.
The hull just has a graphics wrap (not paint) and the graphics can be peeled off. Underneath the graphics is just flat black, non-visual carbon look. The ski was never beached. Just light scuffing on the bottom of the hull from trailer bunks and sliding onto a turfed beach scissor stand.
These hulls are very light weight and extremely easy to flatwater flip and spin. I was running a laydown pipe and TPE964 and it flipped and spun effortlessly. People flatwater flip these hulls with basic B-piped 701 set-ups.
Just drop in your motor/electronics/exhaust and a few other items and go ride!
$6000 or best offer. May consider shipping, but would prefer pickup in person. I am willing to drive a reasonable distance from NC for a confirmed buyer. Feel free to reach out with questions. I can provide additional photos and details to serious buyers.
-Registered and titled in my name in North Carolina. It is titled as a Rip and has a Hull ID number.
-155 OEM pump with driveshaft and 7/12 Skat prop
-Midshaft and midshaft housing
-Thrust trim with lever and cable
-KP Pole and KP steering and steering cable
-Bars and grips
-Motor mounts
-RRP intake grate
-Exhaust hose
-Cooling lines
-Spare brand new, never installed, ride plate from WDK. The current installed ride plate had a very small crack that I reinforced with 2 layers of 1208 biax and haven’t had any issues, but I will also include the spare brand new ride plate, as well.
The hull just has a graphics wrap (not paint) and the graphics can be peeled off. Underneath the graphics is just flat black, non-visual carbon look. The ski was never beached. Just light scuffing on the bottom of the hull from trailer bunks and sliding onto a turfed beach scissor stand.
These hulls are very light weight and extremely easy to flatwater flip and spin. I was running a laydown pipe and TPE964 and it flipped and spun effortlessly. People flatwater flip these hulls with basic B-piped 701 set-ups.
Just drop in your motor/electronics/exhaust and a few other items and go ride!
$6000 or best offer. May consider shipping, but would prefer pickup in person. I am willing to drive a reasonable distance from NC for a confirmed buyer. Feel free to reach out with questions. I can provide additional photos and details to serious buyers.
Attachments
Last edited:
