Ski Wont start after Back flushing

[wjelmer]

I got home and started up my ski then started flushing it out through the pisser, was flushing fine with water coming out the pump and exhaust. then the ski stalled and I pulled the hose out within 4 seconds. then tried to start the ski again and it just cranks, pulled the plugs and the seemed fine but cant get it ti start it just cranks.

 

[Jetaddict]

This may sound silly, but how are you on fuel? I had this happen to me once, racked my brain and finally realized my fuel level was too low and I should have been on reserve!

 

[guiness92]

try drying or changing the plugs, they may have a little moisture on them

 

[tor*p*do]

get her running NOW!
squirt premix into the carb if you have to!
ride it for 20 - 30 minutes to cook out any water to protect your engine

 

[SUPERTUNE]

Check for spark, check for fuel, put some in with a squirt bottle if you have to. Don't forget to put in a set of new plugs also. Back flushing was not the cause...

 

[Jetaddict]

Update??

 

[showmepro1200]

Since he had it in his driveway he had forgot to turn the gas on, and the first burst took what was in the lines and then it wouldn't start afterwards.

J/k - just a possible theory. :shrug:

 

[wjelmer]

So tonight was the first chance I had to work on it cuz I've been working like crazy. Went out and put the plugs in and tried to start it it was just cranking, so I put some premix in the carb and it started for a few seconds then died, made sure I had gas in the tank. So i put some more gas in the carb and it started again and ran then I cut it after 15 seconds. Tried to start it again and started right up, I don't get what the problem was but Im glad its working.

Thanks for your help guys.

 

[ger87410]

Run it for a bit at high RPMs to get any water, that got down to the bottom of the engine, out.