Sea-Doo Help

[Tsmitty]

I have a 2011 Sea doo GTI SE 130 with only 82 hours on it. I just changed the oil and charged the battery. It turned on and ran great for 2 hours.

After turning it off it would not read the key. So, I removed the key and put it back on the dess post multiple times and finally got it to start. Now, the ski does not read the key at all. The LCD turns on and continually scrolls "reading key" across the screen. I tried the learning key as well and still nothing. One beep every few seconds with the "reading key" message.

Any ideas? Need a new DESS post?

Thanks!

 

[Mdavies_02]

I would try Greenhulk or PWC Today for an advice on a Seadoo. For the most part this is more of a Standup/Blaster forum.

Sorry I can't be of help, but good luck with your issue

Mike

 

[OCD Solutions]

Check the connections for moisture/corrosion and if all that checks out and it still doesn't work, then I'd try a new DESS post.

 

[mikidymac]

I would suggest www.seadooforum.com.