Well i have been tracking down parts for the last several months. i started with nothing but now I've finally got everything i need to put it together. thanks to ebay, the boards, and Robert (jetskimechanic). i hope to have my roundnose up and going by the end of this weekend so i guess i better get started :bigeyes:
ready to assemble
- Thread starter Talsivar
- Start date
motorhead10
98 superjet for sale
- Location
- san diego, CA
dam thats a nice build/parts you got in front of you
get it together so you can :brap: :barrel:
get it together so you can :brap: :barrel:
C-Rock87
Water Junky
- Location
- Boise, Idaho
hell yea.. :biggthumpup:
chart102
I wish I thought of that
- Location
- Ruston, LA
that looks like a candy store. i love unwrapping new parts and tasting them.... i mean putting them on my ski.
suva
57
- Location
- Just south of the Citadel, Idaho
So is it assembled yet? Let's hear some specifics....
well i didn't get as far as i wanted. the starter i thought i had turned out to be a Kawasaki one, and i didn't have a wire grommet for the pickup wires.:banghead:
But i got my -3 pole in monday from gilgoneround. put that on, and got the motor together and bolted in. i need to pick up some heatshrink tubing from the autoparts store and get started on wiring up the electrical. while i'm waiting for my starter and grommet. i plan on pulling out the rickter knockoffs footholds. then redoing the rails in turf, maybe some paint. but i'm going to hold off on that till winter right now i just want to get it going while the weather is good.anybody have a steering cable bracket the one that bolts to the pole? i'm missing that too.
But i got my -3 pole in monday from gilgoneround. put that on, and got the motor together and bolted in. i need to pick up some heatshrink tubing from the autoparts store and get started on wiring up the electrical. while i'm waiting for my starter and grommet. i plan on pulling out the rickter knockoffs footholds. then redoing the rails in turf, maybe some paint. but i'm going to hold off on that till winter right now i just want to get it going while the weather is good.anybody have a steering cable bracket the one that bolts to the pole? i'm missing that too.
Attachments
Last edited:
well i finished it up. i took it out last wed. with kevin (crashski). :brap:
I went with what i thought would bring me good power while still being reliable
This is what it has
Riva pipe
Riva head 170 compression
Riva Billet pro series 46mm carb
V-Force 2 reeds
MSD total loss digital
RAD flywheel
64u cases
SBT crank
I went with what i thought would bring me good power while still being reliable
This is what it has
Riva pipe
Riva head 170 compression
Riva Billet pro series 46mm carb
V-Force 2 reeds
MSD total loss digital
RAD flywheel
64u cases
SBT crank
Attachments
G
Goose
Guest
looks great!! id get a girdled head on their asap with that pipe to keep from cracking themm cyls
crashski
X
- Location
- Pacific City Or
Yep his ski ran great, Tim it was great ridding with you we will have to ride again soon.
well i just replaced all the purple parts with black ones (Kevin hooked me up with the side rails :woot
and i bought the other parts. But i still had that ugly purple dash. and it was really botherin me. so i decided to pull it off only the turf was stuck to it and i ripped the side rails. i was just going to returf the sides but figured since i've gone this far i might as well pull out the footholds (i can't stand the ones that are in it). so heres where i'm at. i need to get some new footholds now and don't want to wait around for shipping, so i think i am going to go into blowsion's on monday and pickup some diggers. they are only about 10 min. from me so i don't have to wait for shipping. i thought about waterdawg (only a little over an hour from me). but from what i've seen it looks like a hard fit to get them installed, so i think i will go with the diggers.the foam was dry on the exhaust side but on the other side it was wet. But i dug it out to the bottom and it was dry on the bottom, under the tray,and up front on the sides. so i think just the foothold was leaking,so i just pulled out the wet stuff. i hope to be done with everything and back out on the water by tue.
and i bought the other parts. But i still had that ugly purple dash. and it was really botherin me. so i decided to pull it off only the turf was stuck to it and i ripped the side rails. i was just going to returf the sides but figured since i've gone this far i might as well pull out the footholds (i can't stand the ones that are in it). so heres where i'm at. i need to get some new footholds now and don't want to wait around for shipping, so i think i am going to go into blowsion's on monday and pickup some diggers. they are only about 10 min. from me so i don't have to wait for shipping. i thought about waterdawg (only a little over an hour from me). but from what i've seen it looks like a hard fit to get them installed, so i think i will go with the diggers.the foam was dry on the exhaust side but on the other side it was wet. But i dug it out to the bottom and it was dry on the bottom, under the tray,and up front on the sides. so i think just the foothold was leaking,so i just pulled out the wet stuff. i hope to be done with everything and back out on the water by tue.
