Custom/Hybrid Prop sizing 148 and DASA 1000

[Brian_216]

I'm working on getting my new boat together for this season. I have a DASA 1000, power factor, lightened stock flywheel, and 148 MAXX pump. It's going in a light hull this time around. (Aiming for 50 lbs with hood). I have an 11/17 in it from my old motor. Looking for suggestions. I need a few props to try.

 

[Pablo]

U gotta be real close with that prop. I'd give thrust a call and ask Brian for advice.

 

[geraban19]

I'm working on getting my new boat together for this season. I have a DASA 1000, power factor, lightened stock flywheel, and 148 MAXX pump. It's going in a light hull this time around. (Aiming for 50 lbs with hood). I have an 11/17 in it from my old motor. Looking for suggestions. I need a few props to try.

Brian, I have the same question.
I got a DASA 12mm x 89mm with 148mm Magnum but running B pipe instead of PFP, MSD TL and NOVIs. My hull is a 2012 SJ.
I have a too long 14/21.... (Brian @Thrust told it is not that long but it is...)
Gera

 

[Brian_216]

14/19 is the common prop for that setup on a b pipe. Is your prop cut back at all?

 

[geraban19]

14/19 is the common prop for that setup on a b pipe. Is your prop cut back at all?

Sorry for the delay. Not sure if it is setback. It is about 2-3mm from stator. It is a setback pump for sure.