jetting

[chunky]

Could someone tell me what the correct jetting is for 97sj with stock carbs, tau ceti filters, riva head with 35cc domes and factory b-pipe?
No porting has been done and stock reeds.

 

[B-Roy]

135
75
Stock NS

Stock spring

 

[FLY6584]

135
75
Stock NS

Stock spring

What do you consider a stock spring because different years came with different springs. For an example my 03 had 115g springs in it so I had to switch them out to 95g springs. The 97 might come with the 95g springs though. They should be dull silver, but if I were this guy I would just order some 95g springs anyways to make sure they are the right springs.:biggthumpup:

 

[FLY6584]

Oh and my ski ran better with 70 pilots instead of 75's, but I am running a stock filter(2 screens removed), chokeplates removed, and Carbon Tech Low Tension Reeds. Thats with a bpipe and ADA Head(35cc domes).

 

[chunky]

Thanks guys
I have no experience with jetting at all, this helps.
I bought the ski with the pipe on it but have just changed the stock head to riva, i havnt checked the jetting yet to see what the previous owner had in there. But i will.
Can you tell me what the stock spring is for a 97?

 

[FLY6584]

Thanks guys
I have no experience with jetting at all, this helps.
I bought the ski with the pipe on it but have just changed the stock head to riva, i havnt checked the jetting yet to see what the previous owner had in there. But i will.
Can you tell me what the stock spring is for a 97?

The stock spring on a 97 should be a 95g spring which is the spring you should run, but there's a chance it might be a 115g spring like my ski had.

I would just go ahead and order some 95g springs anyways and put them in there to be sure. :biggthumpup:

 

[chunky]

Will do that.
Thanks.