jet works flow control valve

[grunty13]

where can i buy these, and i see there is a 3/8 and a 1/4 inch, i was told i should really have one so my b pipe doesnt load up my water box,

where can i get one,

and im thinkin i should have the 3/8 but help me out boys

thanks

 

[Mark44]

You can get it from jetworks and you need the 3/8"

http://www.jetworks.net/

Mark44

 

[sjetrider]

you can also install a seat from a needle & seat out of a carb into the stinger line. I use a 2.5 seat to reduce water to stinger. I have a JetWorx valve but have yet to install it as the seat seems to work well.

 

[Mark44]

you can also install a seat from a needle & seat out of a carb into the stinger line. I use a 2.5 seat to reduce water to stinger. I have a JetWorx valve but have yet to install it as the seat seems to work well.

I have also done this but like the valve much better its worth the price.

Mark44

 

[Starvin48]

I've got a couple in stock if you need one. I'm in MI, but way closer to Ohio than you. Let me know!

 

[sjetrider]

I've got a couple in stock if you need one. I'm in MI, but way closer to Ohio than you. Let me know!

Do you have the twist adjustable ones? If so how much shipped to TN.? :scratchchin:

 

[Gainera2582]

anybody know how many turns I need on the pro adjustable one when hooking it up?

Thanks,



aaron

 

[FL-cracker]

I just put mine in and ran it! I dont even know how to turn it.... I couldnt get it to budge?

 

[sjetrider]

anybody know how many turns I need on the pro adjustable one when hooking it up?

Thanks,



aaron

Depends on your set up, you pretty much have to run the boat w/ the line to the stinger off the boat (short runs) and see when (what rpms) the water starts to exit the line. I believe you want the water to start to shoot out about 3000 rpms??????

 

[ski4]

should this go before the t to the stinger int he water line or after the t

 

[marz831]

After the T

 

[ski4]

great thanks

 

[Starvin48]

Depending on your desired result, they can go in a number of places. We've done some racing SX-Rs where there are three to four of them in various places. Crazynuts.

 

[jvann13]

Does this flow control thing make that big of a difference???

 

[sjetrider]

Does this flow control thing make that big of a difference???

its a part that lets you tune through water bro, WE GOTTA HAVE MORE TUNING :beerchug: Every little bit that might help ya know.

 

[SXIPro]

The Pro Series(adjustable by turning) comes factory preset at 3.5 PSI, just like the washer one does....just as an FYI.

 

[sjetrider]

I ended up w/ mine at like 12.5 psi and it seems to come on arround 3000 or 3500 rpms. Worked all day Sunday, not a huge difference in power gaines that I could tell over the 2.3 carb seat that was in there.

 

[chrisdoc0608]

what do you guys set the washer ones at? i have one coming in the mail, i was gonna get the adjustable one but i got the standard one for $25 new so i couldnt pass it up.