Super Jet Impeller

[Squirrely 111]

Hey everyone when I bought my ski it came with a Solas YAM-YB-SC-I 14.5-18 stainless steel impeller. It also has all of these mods done to it Triton Engineering Head (185 psi), Red Top Dual 44mm Mikuni Carbs, Coffman Lightning Series Exhaust, Tau Ceti flame arrestors, Jet Dynamics Extended Ride Plate, Skat-Trak Stainless Steel Intake Grate. I know that the coffman pipe needs to be changed to a b pipe which I am planning on doing but is there a different impeller that I can buy that will give me more pop in the low-end? I dont know if it's at all like a wakeboard boat because on a boat when you want to be able to yank someone up for wakeboarding you have a different prop than if you were to want to be able to have a higher top speed.

Let me know what you guys think and what everyone uses thank you! Oh and I am also going to be adding a MSD enhancer to the list of mods if that would have an effect on the impeller.

Thanks

 

[steve-uk]

9/15 hooker would be a good prop

changing the cdi is also a good thing to do the stock cdi is a limitation

 

[FlightPlanDan]

motor?
701? 650? 1100 Dasa? 1200 X-Scream?

Kawi Product?

 

[Squirrely 111]

9/15 hooker would be a good prop

changing the cdi is also a good thing to do the stock cdi is a limitation

Okay I will check the hooker out thank you.

motor?

stock 701

 

[FlightPlanDan]

If it's '96-'07 rn the stock impellor is 13/17 aluminum.

I'm not familiar with that pipe, but it seems that you're impellor is for speed.

As stated, a Hooker or maybe a Skat swirl 12/17 would be helpful.

 

[Squirrely 111]

Okay thank you for the feedback