Identify these reeds please - boyesen?

[Polish jet pilot]

Hi,

I would like some help from the knowledgeable persons in here - what reeds are these and do they fit OEM 62T inatke?


http://www.4aces.fora.pl/skutery-w-...d-made-freestyle-by-benek-2010,39-90.html#687

The reeds are almost on the bottom of that page.

Thank you

Andrew

 

[Big Kahuna]

looks like the older Boyesen reed blocks.

 

[vitalikol]

Looks like hand made shiot to me

 

[Big Kahuna]

Try 1995-1996. They actually worked pretty good.,

 

[Polish jet pilot]

They are not home made for sure. Will these fit my stock cases? B.K. what is your opinion?

 

[Big Kahuna]

If they are cheap, then go for it. I have had great luck with stock cages with Carbon Tech reeds with a boyesen reed stuffer.

 

[Polish jet pilot]

Are replacment petals availabe for these? So these would use the "dual stage" design?

 

[Big Kahuna]

That is a good question. I do not remember if they used a different configuration.

 

[Polish jet pilot]

As you can see these came with entire inatke system - 2 x 49mm watercraft magic CNC carbs(!) - setup quite oddly (as for me) low jets were larger than high jets (eg. 130 /100) 65 gr spring + 2.5 needle.

I understand that is a typical "freestyle" setup?

 

[Polish jet pilot]

So would the reed valves in the link be Boyesen RAD valves?

Anybody would have part number for replacement reeds? I saw that "modern" RAD petals look a bit different than the ones in the link....

Andrew