- Location
- The D
i didnt start this topic..
Last edited:
FP chamber wear
- Thread starter unclehulka13
- Start date
- Location
- Germany
ok unclehulka will probably pick on me again, but I just have to say it :biggrin: you won't have this problem with the leightweight.de hull :Banane01:
They really did a good job on it and solved some problems like that pretty good. Does somebody know what Blowsion wants for it, as they sell it in the US??
They really did a good job on it and solved some problems like that pretty good. Does somebody know what Blowsion wants for it, as they sell it in the US??
- Location
- The D
JensNonsens said:
i think they're about 9k.
Mile9c1
X-H2O.com
- Location
- Grand Rapids, MI
Dent it, or grind the reinforcing down where it rubs.
Mile9c1
X-H2O.com
- Location
- Grand Rapids, MI
Aluminum is really soft, you don't want it rubbing against anything (even Hydroturf).
beachedflunkey
wavejunkies
- Location
- Virginia Beach
I'm sure this has been discussed a million times before but I really need some positive reinforcement here. Any trick to denting it? Just set it down on a little padding (sheet of carpet, turf, whatever), and whack a hammer on it where it rubs?
I did grind down my reinforcements where it rubbed but perhaps not enough. It is pretty damn thick...
I did grind down my reinforcements where it rubbed but perhaps not enough. It is pretty damn thick...
Mile9c1
X-H2O.com
- Location
- Grand Rapids, MI
I would try a rubber mallet or a standard hammer on a piece of wood (so you make a nice flat surface). Yes, just where it rubs.
Might want to wear earplugs when you're banging on it.
Might want to wear earplugs when you're banging on it.
Superjet3
Waterlogged
- Location
- Jersey Shore
How about putting the turf on the chamber rather then the hull?
- Location
- The D
BTW posts are ****ed up./
beachedflunkey
wavejunkies
- Location
- Virginia Beach
After reinforcing the hull with two layers of 17oz biax and one layer of mat, I had to line the side with hydroturf so the pipe would not knock on the hull. Now it seems the chamber is wearing where it layed the most against the turf. Should I flip the turf so the back is touching the pipe or something else I can do about this wear? This is after 20-25 hrs of use.
I tried denting the chamber but it giving me that sickening feeling in my gut.
I tried denting the chamber but it giving me that sickening feeling in my gut.
