Freestyle Found a ski, but not sure it will work for freestyle...

Citizen

Citizen

Location
Coeur D' Alene, ID
Seems like it is modded more for racing than for freestyle. I do not plan to race and am limited to lakes to play around it. Should I give this one a pass? I am afraid it won't have the low end hit to play around on the lake.


Selling a 1999 superjet with a ton of work and parts.

$4800 no lowballing please!!!


-MSD digital multi-channel programable ignition http://www.blowsion.com/products/45-msd-total-loss-yamaha-701760-superjet.aspx
-AC pole
-aluminum pump shoe http://optimaracing.com/product_info.php?products_id=98
-intake grate with pump stuffer http://www.watercraftpartsdirect.com/product-p/112-70103.htm
-bored exit nozzle
-dual cooling pump
-Worx ride plate http://www.roguemotorsportz.com/i58...ormance_Ride_Plate.aspx?sc=Google&ad=Products
-Waterdawg customs hood hooks http://www.waterdawgkustomz.com/proddetail.php?prod=SJHHOOK&cat=5
-R-pot Carbon racing hood
-Hot Products billet gas cap
-modified waterbox
-(2) Tau Ceti pro series arrestors
-(2) 46mm Riva carbs
-R&D dual intake manifold http://www.rd-performance.com/catalog/intakemanifolds.asp?CATEGORY=Intake Manifolds
-reed spacer http://www.rd-performance.com/catalog/reedspacers.asp?CATEGORY=Reed Spacer Kits
-flat top pistons
-R&D girdled billet head http://www.rd-performance.com/catalog/billetheads.asp?CATEGORY=Billet Head Kits
-R&D dry pipe http://www.performancecatalog.com/product-p/332-70102.htm
-R&D exhaust manifold
-Micro Touch water injection system
-Triton Eng. billet coupler
-FRM Racing throttle
-UMI turn plate
-Modded pump? (was told but still need to look into it)
-Blosion lowered handlepole bracket
-1999 hull w/ carbon R-pot racing hood and nose, scupper, footholds, ht moto mat and custom House of Kolor paint
 
509freerider

509freerider

Location
Spokane, Washington, United States
Should have plenty of low end power. A racer friend of mine has a similer setup and if he just pulled the hull extensions and 50 pounds of ballast out of it it would make a perfect freeride ski. Depending what your looking to do a impeller for more low end and footholds would make it a awsome ski in my opinion. Race ski's have power everywhere!
 
Matt_E

Matt_E

steals hub caps from cars
Site Supporter
Location
at peace
A good race engine hits hard everywhere.
The R-Pot hood is pretty lightweight, you just need to work on the air intakes a little bit.
I don't really see anything wrong with that ski for a freestyle platform with a little bit of work.
 
Cannibal

Cannibal

Tasty Human
Location
Summit Lake, WA
That's deftons56's ski, or at least he has it posted up over on the NW section at PWCT. Crab has riden with him, he might know something about it or give you an opinion.

Harbor Dan rides with one of those hoods, un-modified I believe, but ocean riding, not freestyle. He's not exacly easy on it, but you might want to hit him up and see how its holding up for him.
 
Citizen

Citizen

Location
Coeur D' Alene, ID
Thanks for the heads up..i did see that one before but I am just getting into the sport more or less..and not super handy with fiberglass etc. Really want to find my ski turnkey and ready to ride. I don't want to have to put in the footwells.


Looks like I just sold my hayabusa to a guy in vancouver tho....so i may be over there anyways to deliver it. Might work out...we will see. Thanks again for the info guys and ill pm ya when im up and running 509.


On a side note..know anyone with a single jetski trailer they would sell cheap..the one over in seattle doesnt come with a trailer.
 
You must log in or register to reply here.
Top Bottom