- Location
- Australia
G'day guys. Just wondering if any1 has the bed plates that are glued in below the engine for a waveblaster1?
Blaster Engine Bed Plates
- Thread starter epblasters
- Start date
- Location
- Morris Ct
Huh?
- Location
- Morris Ct
Your guess is as good as mine, its questions like this that make people run out to their skis and say oh crap did i forget to glue in my bed plates in my blaster?
BruceSki
Formerly Motoman25
- Location
- Long Island
He's talking about the fiberglass motor mounting plates glued with green glue. They will de laminate on some blasters that have been beaten to hell and back.
- Location
- Australia
Yeah sorry guys. Some where along the line my blaster i bought has had a monster impact and put a hole through the hull and busted 1 of the plastic bed/hull plates that are glued to the inside of the hull that the engine mounts are bolted to. Now obviously the plates aren't a part that wears out. I'm pitty sure you cant buy them but i just thought i would post to see if any1 would have some from a previous broken Waveblaster 1.
- Location
- Mullica Hill NJ
i noticed one of mine started to detach from the hull when i got my hull back from paint, so i power washed the hull really good and dried it out then put 5200 under the plate.