- Location
- Lake Orion, MI
buddy of mine just picked up an sxi pro for cheap to put some TLC into and it sounded like it was turning over a little slow so we took battery wires off and cut them back a bit to get some fresh wire that wasn't chewed up and to clean the corrosion off and when we were loosening the bolt off of gold post from e-box the post began to spin with the bolt. i believe the post belongs to the starter relay not positive tho. Now we don't even get the slow turn over just one click and then nothing. My friend who bought it is new to jet skis and really starting to get discouraged with his buy so any help is greatly appreciated.
also the positive wires that we cut back and resealed looked a little dark but not burnt rather than the original copper color and the metal ring was melted into plastic washer on gold post leaving e-box to starter. could this be losing power as well
thanks everyone,
Dom
also the positive wires that we cut back and resealed looked a little dark but not burnt rather than the original copper color and the metal ring was melted into plastic washer on gold post leaving e-box to starter. could this be losing power as well
thanks everyone,
Dom