cheapest source of primer plungers?

[Mouthfulloflake]

I only need the pump part?

2 of mine stopped working this spring, and I need to replace them.

 

[Shonuff]

I only need the pump part?

2 of mine stopped working this spring, and I need to replace them.

Hot Products through Zigler.

 

[Shonuff]

Price wise, Blowsion is good but they'll kill you in shipping.

 

[Mark44]

JSS bulb style 4 years and going strong.

Mark44

 

[Matt_E]

JSS bulb broke after half a season for me. Nice concept, but I am back to plunger.

 

[ATS_Aaron]

I only need the pump part?

2 of mine stopped working this spring, and I need to replace them.

Can you disassemble and replace the seals/o-rings?

Aaron

 

[Mouthfulloflake]

cool, Ill check with Zig.

 

[Mouthfulloflake]

?you know.. Ill try that

that would rock.

these were from a cheap local shop, they only lasted a few years.

Can you disassemble and replace the seals/o-rings?

Aaron

 

[Mike W]

I had a problem last year with my limiting rope getting wraped around the plunger and bending it. I think the plunger from JSS would be worth a try for the price.

 

[Watcon]

Primer parts

I carry both types of primers, fittings, tee's, etc.
http://www.watcon.com/Catalog_Pages/Primer_Kits.htm

 

[Mark44]

JSS bulb broke after half a season for me. Nice concept, but I am back to plunger.

Did you have it in the tray where you could kick it? I have mine and Katie's under the hood because we never need them and they last a very long time but I guess anything does if it is not used. It’s all in the proper tuning.
Mark44

 

[Mouthfulloflake]

the pumps im replacing are on my kawi 750 sitdowns, they live on a dock year round, out in the weather, and they have always been hard starting when cold.

my yamahas rarely need the primers pumped.

:biggthumpup:

Did you have it in the tray where you could kick it? I have mine and Katie's under the hood because we never need them and they last a very long time but I guess anything does if it is not used. It’s all in the proper tuning. biggthumpup:

Mark44

 

[Mark44]

the pumps im replacing are on my kawi 750 sitdowns, they live on a dock year round, out in the weather, and they have always been hard starting when cold.

my yamahas rarely need the primers pumped.

:biggthumpup:

Sweet that what I like:biggthumpup:

Mark44

 

[Matt_E]

Did you have it in the tray where you could kick it? I have mine and Katie's under the hood because we never need them and they last a very long time but I guess anything does if it is not used. It’s all in the proper tuning.
Mark44

I did indeed have it in the tray, but not where it could be kicked. (I've got a weird older XFT/WCF hood that has a lip extending over the dash - it's installed under that lip)

 

[onesojourner]

I don't have a working choke or a primer on my ski...

 

[yamanube]

I put my primer in between the fuel on/off and the hood latch. It seems to be fairly out of the way there versus where the stock choke was.

 

[Mouthfulloflake]

I sent an email to Zigler inquiring about pricing.

 

[Mark44]

I did indeed have it in the tray, but not where it could be kicked. (I've got a weird older XFT/WCF hood that has a lip extending over the dash - it's installed under that lip)

Hmmm interesting.

Mark44

 

[Mouthfulloflake]

maybe Matt_E rides alot harder than you Mark?

nah, he probably just has alot stronger finger.

:biggthumpup:

 

[Mark44]

t

Yep probably.:biggthumpup:

maybe Matt_E rides alot harder than you Mark?

nah, he probably just has alot stronger finger.

:biggthumpup: