b pipe cooling

[hermanns]

sorry if this has been asked before, i couldn't find it. All I found was threads on dual cooling or just saying line from the pump. I am running single cooling on my b pipe, and I don't know what to do about the 2 lines coming from the pump. Do I block one off somehow, or am I supposed to let the other run to something? I am really confused on what to do. Thanks for the help

evan

 

[Superjet 9195]

T them together before you go into the manifold.

 

[hermanns]

thanks a lot, I thought that might be what to do, but wasn't sure. Now to get this thing put on.

 

[hermanns]

After pulling it more apart, it looks like one of them was going to the siphon thing, would I be better off just to leave that and run the cooling from the other side?

 

[Superjet 9195]

Yes.

 

[SuperJETT]

One of these days I'm going to do a writeup on cooling, like get into the principles of heat transfer and fluid flow, but hopefully on simple terms so people get FIGURE OUT and UNDERSTAND what/why they need to do, not just do what someone else said works.

One of these days...

 

[Superjet 9195]

One of these days I'm going to do a writeup on cooling, like get into the principles of heat transfer and fluid flow, but hopefully on simple terms so people get FIGURE OUT and UNDERSTAND what/why they need to do, not just do what someone else said works.

One of these days...

That would actually be really cool if you did. I would like to read it.

 

[infamy]

sorry if this has been asked before, i couldn't find it. All I found was threads on dual cooling or just saying line from the pump. I am running single cooling on my b pipe, and I don't know what to do about the 2 lines coming from the pump. Do I block one off somehow, or am I supposed to let the other run to something? I am really confused on what to do. Thanks for the help

evan

the line on the left side is for cooling the other is for your stock bilge. run the line on the left to th bottom of your pipe manifold per factory pipe instructions or however else you choose to run your cooling. the bilge line should go into a littl plastic box mounted below your coupler.