SX/SXi/SXi Pro Advent Ebox issues

[naithgroves]

Hi guys I bought a T3 to install In to what I thought was an sxi Ebox but I'm not sure if it is? The plug ends on the t3 are different and 4 of the wires go elsewhere. 2 of them go to the coil and the other 2 go to the starter on separate single plugs. To make matter worse all the wires are different colours? Can anyone instruct or direct me to a thread that shows how to wire one of these up?

Cheers!

 

[rubbertoe]

That one looks like its for an SXR judging by the connectors .also just get on advents web page for installation instructions

 

[naithgroves]

Thanks yes i thought the connectors looked new gen. Advents installation instructions don't have anything showing how to connect this? It does say sxr/sxi ignition but not sure why because they are not the same!

 

[E_T_03]

The advent Box you have is for a sxr 2004 and up. the advent for sxi and sxr2003 have different connector

 

[swannysxr]

Yes '04 and up were digital cdi, but Kawi didn't start using that connector until '08 i do believe. You'll have to splice in some bullet connectors.

 

[Scorn800]

Someone made a adapter harness. I think you may be able to get it from hot products.